Page 119 - Icon Ridge Working Gear

Working Security

Nitrile Gloves Blue Fully Coated

• Microgranulated
• Fine knitted carrier fabric: mesh number (Gauge) 13 and Lycra
(Elastane) of approx. 3 %, thus very high wearing comfort and
flexibility
• Microgranulated nitrile full coating
• Back of the hand is completely liquid-tight
• Excellent dry grip
• Improved oil grip due to microgranulation
• Oil and grease resistance
• Solvent-free, water-based
• DMF-free (Dimethylformamide)
• Silicone-free
• Puncture resistance - no skin contact with the coating, improved
wearing comfort
• Applicable to food
• Protection against mechanical hazards according to EN 388
Technical Data EN 388
Article No. Article Description QTY Standard: 4
5405 5 120 7 GLOV.NITR.BLUE FULL.COAT.7 5* 12 Abrasion resistance: 1
5405 5 120 8 GLOV.NITR.BLUE FULL.COAT.8 5* 12 Cutting resistance: 2
5405 5 120 9 GLOV.NITR.BLUE FULL.COAT.9 5* 12 Tear propagation resistance: 1
5405 5 120 10 GLOV.NITR.BLUE FULL.COAT.10 5* 12 Puncture resistance:
Nitrile glove, yellow, fully coated

• Cotton with double dipped nitrile coating
• Good abrasion resistance
• Very good dry grip
• Good sense of touch
• Knitted cuff
• Nitrile fully coated
• Liquids, oil and grease-resistant
• Protection against mechanical dangers according to DIN EN 388

Technical Data
Standard: EN 388
Article No. Article Description QTY Abrasion Resistance: 3
5405 123 8 NITR.GLOVES YEL.FUL.COAT.SZ. 8 12 Cut Resistance: 1
5405 123 9 NITR.GLOVES YEL.FUL.COAT.SZ. 9 12 Tear Resistance: 1
5405 123 10 NITR.GLOVES YEL.FUL.COAT.SZ.10 12 Puncture Resistance: 1

Nitrile Gloves Blue Partly Coated

• Fine-knit carrier textilee: Mesh size (Gauge) 15 and Lycra (Elastane)
approx. 3%, giving very high comfort and flexibility levels
• Nitrile part coating 3/4 dipped (tropic), 1/4 actively breathing back of
hand
• Back of hand 3/4 fluid-tight
• Very good dry grip
• Oil and grease resistance
• Free from solvents, manufactured on water base
• DMF free (dimethyl formamide)
• Silicone-free
• Penetration-free - no skin contact with the coating, increased comfort in
wearing
• Protection from mechanical hazards according to EN 388
Technical Data
Standard: EN 388
Abrasion Resistance: 4
Cut Resistance: 1
Article No. Article Description QTY Tear Resistance: 2
5405 5 30 7 GLOVES NITR.BL.7 PARTL.COAT.5* 12 Puncture Resistance: 1

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 119