Page 152 - Icon Ridge Working Gear

Working Security

Safety shoe product finder

Overview of safety classes
Safety shoes made of leather, EN ISO 20345
Basic requirement SB Resistance of the toe cap against impact up to 200 Joule
Safety class S1 Closed heel area, antistatic, fuel-resistance, energy absorption capability in the heel area
Safety class S2 As S1, with additional resistance to water ingress and water uptake
Safety class S3 As S2, with additional penetration protection, profiled running sole
Safety shoes made of PVC or PUR, EN ISO 20345
Basic requirement SB Resistance of the toe cap against impact up to 200 Joule
Safety class S4 Additional antistatic, energy absorption capability in the heel area, fuel-resistance, profiled running sole
Safety class S5 As S4, with additional penetration protection

Additional requirements for special applications

Symbol Covered risk EN ISO 20345
SB S1 S2 S3 S4 S5
- Basic requirement
P Penetration protection
A Antistatic
HI Heat insulation
CI Cold insulation
WRU Resistance of the upper shoe against water penetration and uptake
HRO Heat resistance of outsole against contact heat (+300°C/min)
WR Water-resistance of the whole shoe
M Metatarsal foot protection
FO Fuel and oil-resistance
SRC Slip-reducing properties in accordance with standards
ESD Electrostatic discharge avoidance
BGR 191 Shoes are certified for later adaptation with orthopaedic insoles
(DGUV 112-191)

■ MUST criteria
■ CAN criteria
■ Combination not possible

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 152