Page 217 - Icon Ridge Presents ATORN
P. 217
Thread tools \ Hand tap M / Hand tap MF
HSSE-PM hand tap ( DIN 352 )
For high-strength steels < 1300 N/mm 2
M HSSE- ISO 2 x
PM
3xd A (6-8) D (3,5-5) C (2-3)
Application: Ident. No. 734–744: Taper tap with notch shape A with one ring
Ident. No. 030–120: For manually tapping metric threads in through holes and Ident. No. 834–844: Second tap with notch shape D with two rings
blind holes in the (steel), stainless steel, (cast) and special alloy material groups Ident. No. 934–944: Third tap (plug) with notch shape C without ring
up to a strength of 1300 N/mm in single part production.
2
Ident. No. 734–944: For producing metric threads by hand in through holes Advantage:
and blind holes, in steel, (stainless steel), cast iron and (special alloys) material Ident. No. 030–120: Long service life and high level of process reliability
groups up to a strength of 1300 N/mm in single-part production. thanks to innovative cutting geometry for machining high-strength steel
2
Ident. No. 734–944: Long service life and process reliability through innova-
Execution: tive cutting geometry in machining high-strength steel
Ident. No. 030–120: Set consisting of taper tap (form A), second tap (form D)
and third tap (form C)
Ident. No. 030–120, 744–844 Ident. No. 030–120, 934–944 Ident. No. 030–740
Second tap, shape D Third tap, shape C Taper tap, shape A
2
Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat.
No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC
13017030-120
13017734-744
13017834-844
13017934-944
Version Set Taper tap Second tap Third tap
Lead angle shape A/D/C A D C
13017... 13017... 13017... 13017...
Ident. No. Ident. No. Ident. No. Ident. No.
mm mm mm mm mm
M3 0.5 2.5 40 3.5 2.7 030 - - - - - -
M4 0.7 3.3 45 4.5 3.4 040 734 834 934
M5 0.8 4.2 50 6 4.9 050 738 838 938
M6 1 5 50 6 4.9 060 740 840 940
M8 1.25 6.8 56 6 4.9 080 744 844 944
M10 1.5 8.5 70 7 5.5 100 - - - - - -
M12 1.75 10.2 75 9 7 120 - - - - - -
Prod. Gr. 1KM
HSS hand tap ( DIN 2181 )
for universal use up to 1000 N/mm 2
MF HSS
3xd D (3,5-5) C (2-3)
Application: No. 13023 030–13023 280: Set containing taper
No. 13020 045–13020 360, 13023 803–13023 tap (form A) and third tap (plug) (form C) No. 13020 045–13023 786
886: For manually tapping fi ne metric threads in No. 13023 703–13023 786: Taper tap with notch Taper tap, shape D
through holes and blind holes in the steel, NF metal shape A with one ring
and (cast) material groups up to a strength of 1000 No. 13023 803–13023 886: Third tap notch shape
N/mm in single part production. C without ring
2
No. 13023 030–13023 786: For producing metric
fi ne threads by hand in through holes and blind Advantage:
holes, in steel, non-ferrous metals and (cast iron) No. 13020: Long service life and high level of No. 13020 045–13023 280, 13023 803–13023
material groups up to a strength of 1000 N/mm in process reliability thanks to innovative cutting 886
2
single-part production. geometry and universal application for maximum Third tap, shape C
fl exibility in use
Execution: No. 13023 030–13023 786: Standard geometry
No. 13020: Set consisting of taper tap (form A) with very good price/performance ratio
and third tap (form C) No. 13023 803–13023 886: Standard geometry
with a very good price-performance ratio
Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat.
2
No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC
13020
13023030-280
13023703-786
13023803-886
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 217
0253_EN_2018_KERN[21847097]-l.indd 253 12/17/2018 3:32:16 PM
