Page 221 - Industrial Tools Catalog (2)

Measuring aids \ Feeler gauges
Feeler gauge strip assortment in wall support INOX
The organisation system for your workshop

Application: ƒ Wall-mounted holder made of sheet steel, paint:
For use in various areas of mechanical engineering, RAL 7035, light grey
e.g. measuring dimensional tolerance between 2
components, as alignment references etc. Technical data:
ƒ Min./max. length of application area: 0.01-0.25
Execution: mm
ƒ Practical bracket for clamping sections of feeler ƒ Nominal dimension in assortment: 0.01-0.1 mm,
gauge strip increasing by 0.01 mm | 0.12 mm | 0.15 mm | 0.18
ƒ 15 feeler gauge cans 12.7 mm x 5 m STAINLESS mm | 0.2 mm | 0.25 mm
STEEL ƒ Length x width x height: 330 x 100 x 110 mm
Ident. No.
36225... Price/unit, € 420
●
Prod. Gr. 3BF
Underlay foils in precision design
Standard widths 12.7/50/100/150/300 mm

Application: ƒ cold-rolled INOX spring steel, material no.
For setting up tools, adjusting devices, com- 1.4310
pensating for tolerances, supporting instru- This material is an alloy of 17% chromium and 7%
ments, aligning machines, setting up forms, nickel and has good corrosion resistance. This
adjusting bearing play, adjusting composite material is cold-rolled to achieve high strength. The
units, readjusting cutting blades, aligning material is therefore ideal for stainless precision
workpieces, etc. gauge bands, underlay foils, stainless steel springs
The following materials are available: and higher-strengths parts. This material is only
slightly magnetic and therefore cannot be clamped
ƒ hardened spring steel, material no. 1.1274 when grinding on magnetic chucks.
With a carbon content of over 1%, this material is ƒ cold-rolled, spring-tempered brass band,
ideally suited for feeler gauge bands, support sheets material no. 2.0321
and springs subject to high loads for which there With a composition of 63% copper and 37% zinc, this
are no corrosion requirements. This material is material is the standard grade for spring-tempered
magnetic. rolled brass. This material is not magnetic.
Bore plug gauge

Application:
For measuring bores
Technical data:
Execution: ƒ Scale value: 0.1 mm
ƒ Knurled handle ƒ Material: Stainless steel
ƒ Hardened and ground bolt ƒ Taper ratio: 01:10
Min./max. length measuring 1-6 mm 4-15 mm 15-30 mm 30-45 mm
range
Ident. No.
36360... Price/unit, € 010 040 150 300
●
●
○
●
Prod. Gr. 361
Wedge gauge
Application: Advantage:
For measuring gaps and clearances ƒ Fast and reliable reading of measured values
Execution: Technical data:
ƒ Made from hardened steel, hard-chrome plated ƒ Scale value: 0.1 mm
ƒ Material: Steel
Min./max. length measuring range 0.5-7 mm 0.5-11 mm
Ident. No.
36370... Price/unit, € 010 020
●
●
Prod. Gr. 361
Metric drill gauge

Application: Technical data:
For quickly determining drill and mill diameters. ƒ Min. diameter of measuring range: 0.1 mm
ƒ Max. diameter of measuring range: 10 mm
Execution: ƒ Pitch: 0.1 mm
ƒ Made from special steel, nitrided ƒ Number of holes: 100 PCS
Ident. No.
36380... Price/unit, € 020
●
Prod. Gr. 361

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com 1021
Availability subject to country specific rules and regulations.