Page 313 - Industrial Tools Catalog (2)

Workshop equipment \ Workbench vices

Accessories for 51028 001 51028 002 51028 003 51028 011 51028 012 51028 013
51028... Rotary base Ident. No. 021 022 023 031 032 033
●
●
●
●
●
●
51028... Steel jaws Ident. No. 041 042 043 041 042 043
●
●
●
●
●
●
Vice lifts/height adjustment devices
with gas strut, to fit no. 51028 001-015
Application: ƒ Ident. No. 150: can be rotated 360°
For lifting, rotating and lowering of parallel vices.
Advantage:
Execution: ƒ Required height and rotation direction can be continuously adjusted
ƒ Simple to loosen and close using the clamping lever
ƒ Includes fastening screws Technical data:
ƒ Ident. No. 100–130: Can be rotated 360° ƒ Height adjustment: 215 mm

Ident. No. 100, 120 Ident. No. 110, 130 Ident. No. 150
Suitable for jaw width (mm) 100 100 125 125 125
Colour Blue Green Blue Green Grey
51060... Ident. No. 100 110 120 130 150
●
●
●
●
●
Prod. Gr. 5HA
Parallel vice
With a rear opening action, made of grey cast iron
Execution: Advantage:
ƒ High-quality grey cast iron with pearlitic texture ƒ Excellent clamping precision thanks to long, pris-
ƒ Hardened, ribbed steel jaws can be swapped for matic precision guide
smooth, ground steel jaws ƒ Spindle protected from dirt and damage by
ƒ Smooth-running spindle with trapezoidal thread covering
ƒ High-quality hammertone finish, green (similar to
RAL 6011) Technical data:
ƒ Colour: Green
ƒ Material: Grey cast iron
Jaws width (mm) 80 100 125 150
Min./max. clamping width 0-100 mm 0-140 mm 0-175 mm 0-250 mm
Clamp in depth (mm) 55 75 75 90
Weight (kg) 6.5 17.0 29.0 53.0
51035... Ident. No. 130 140 150 160
+
●
●
+
+
●
+
●
Prod. Gr. 512
Accessories for 51035 130 51035 140 51035 150
51037... Rotary base Ident. No. 130 140 150
+
+
+
●
●
●
51038... Steel jaws Grooved Ident. No. 030 040 050
●
●
●
51038... Steel jaws Smooth Ident. No. 130 140 150
●
●
●
Accessories for 51035 160
51037... Rotary base Ident. No. -
51038... Steel jaws Grooved Ident. No. 060
●
51038... Steel jaws Smooth Ident. No. 160
●
Vice lift/height adjustment device
With gas strut, to fit 51035 140 and 150
Application: Advantage:
For lifting, rotating and lowering of parallel vices. ƒ Required height and rotation direction can be
Execution: continuously adjusted
ƒ Can be rotated 360° Technical data:
ƒ Simple to loosen and close using the clamping ƒ Height adjustment: 215 mm
lever ƒ Colour: Reseda green RAL 6011
ƒ Includes fastening screws
Suitable for jaw width (mm) 100 125
51060... Ident. No. 050 060
●
●
Prod. Gr. 512
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com 1113
Availability subject to country specific rules and regulations.