Page 332 - Industrial Tools Catalog (2)
P. 332
Workshop equipment \ Bending equipment
Karnasch angle bender 100 E
Bending machine to meet exacting requirements and for professional applications
Application: Advantage:
For cold and warm bending The low tare weight of the spheroidal graphite iron
still allows optimum bending performance
Execution: Using high-grade steel that has undergone subse-
Basic body and bending arm cast and milled from quent heat treatment,
spheroidal graphite iron (no grey cast iron) it is possible to keep the dimensions of the bending
Bending performance with radius jaw: flat steel jaws small.
100 x 6 mm or 50 x 12 mm, hot 100 x 12 mm or 60 Tightest Z and U-bends are therefore possible
x 20 mm
Round steel: 18 mm, hot: 30 mm Delivery:
Using the included sharp-edged jaw: sheets up to Bender with bending lever, sharp-edged jaw, radius
maximum thickness of 2 mm jaw r = 4 mm, longitudinal stop, bending stop, on-
With holes for workbench mounting board tool
Can be used immediately with basic equipment
provided Technical data:
Dimensions: 290 x 260 mm (length x width), Max. flexible cross-section: 100 x 10 mm
Max. bend angle: 60 Degree
bending lever: 710 mm, longitudinal stop: 440 mm Weight: 25 kg
57586... Ident. No. 200
●
Prod. Gr. 5IF
Source: Hahn+Kolb Werkzeuge GmbH
1132 Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations.
