Page 404 - Industrial Tools Catalog (2)

Screwdrivers \ Hexagon and TX screwdrivers
Hexagon offset screwdriver sets
Long version

Execution: ƒ Ident. No. 210: hardened, blackened Ident. No. 200
ƒ Hexagonal ball end on the long wrench side Advantage: Ident. No. 210
ƒ Chrome-vanadium steel ƒ High level of corrosion protection
ƒ Ident. No. 200:
ƒ Hardened ƒ Ident. No. 200: Longer service lives thanks to
ƒ Manganese phosphate plated manganese phosphate plating

1.5 mm | 2 mm | 2.5 1.5 mm | 2 mm | 2.5
Width across flats mm | 3 mm | 4 mm | mm | 3 mm | 4 mm |
5 mm | 6 mm | 8 mm
5 mm | 6 mm | 10 mm
Surface Phosphated Phosphated
Number of pieces in assortment/set 7 9
Version
52140... Long Ident. No. 200 210
●
●
Prod. Gr. 533
Hexagonal angled screwdriver
Long design, with Magic-Ring® ball head

Execution: ƒ Excellent retention force thanks to robust, wear-
ƒ Hexagonal ball end with spring steel ring on the proof spring steel ring
long wrench side ƒ Makes it easier to remove countersunk screws and
ƒ Chrome-vanadium steel to insert screws into slanted or deep blind holes
ƒ Suitable for stainless steel, brass or other
Advantage: non-magnetic screws
ƒ Ball end enables screws to be tightened at angles
of up to 25° Technical data:
ƒ Surface: Chrome-plated
Width across flats 3 mm 4 mm 5 mm 6 mm 8 mm 10 mm
Limb length x limb length 2 129 x 23 mm 142 x 29 mm 163 x 33 mm 184 x 38 mm 206 x 44 mm 231 x 50 mm
Version
52140... Long Ident. No. 430 440 450 460 480 500
●
●
●
●
●
●
Prod. Gr. 533
Hexagon offset screwdriver sets
Long version, WERA Hex-Plus profile
Execution: ƒ Ball end profile also enables slightly slanted screw connections in hard-to-reach
ƒ Hexagonal ball end on the long wrench side areas
ƒ Ident. No. 370–390: Continuous hexagon Delivery:
ƒ Ident. No. 390: Short arms bent by 100° In lockable plastic holder
ƒ Ident. No. 400: Made completely from stainless steel
ƒ Ident. No. 410: Colour plastic coating Technical data:
Advantage: ƒ Width across flats: 1.5 mm | 2 mm | 2.5 mm | 3 mm | 4 mm | 5 mm | 6 mm |
8 mm | 10 mm
ƒ Hex-Plus profile provides a larger contact surface with reduced notch effect.
Damage to the screw head is prevented while simultaneously achieving up to
20% higher transmittable torque.

Ident. No. 390
Ident. No. 370 Ident. No. 400
Ident. No. 410

Surface Nickel-plated Chrome-plated Bare Burnished
Version
52139... Long Ident. No. 370 390 400 410
●
●
●
●
Prod. Gr. 542

Source: Hahn+Kolb Werkzeuge GmbH
1204 Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations.