Page 592 - Industrial Tools Catalog (2)
P. 592
General requirements \ Tool boxes and cases
Model JET3000 JET5000 JET6000 JUMBO6700
Internal length x internal width x internal 329 x 233 x 152 mm 432 x 301 x 170 mm 473 x 351 x 197 mm 535 x 360 x 195 mm
height
Material PP - Polypropylene PP - Polypropylene PP - Polypropylene PP - Polypropylene
Capable of flying Yes Yes Yes Yes
55481... Ident. No. 670 680 690 710
●
●
●
●
Prod. Gr. 538
leather tool bag with VDE tool assortment, 17 pieces
Execution: 1 piece each VDE screwdriver Phillips PH1, PH 2
Robust, lockable leather tool case 1 piece VDE combination pliers 180 mm
VDE tools according to DIN EN 60900 1 piece VDE side cutters, 160 mm
Pliers with two-component handle and chrome- 1 piece VDE snipe nose pliers 200 mm
plated head 1 piece VDE water pump pliers 250 mm
Screwdriver with protective insulation and ergo- 1 piece Automatic wire stripping pliers
nomic two-component handle 1 piece Cable knife with hooked blade
Advantage: 1 piece Machinist‘s hammer 300 g
Produced to the highest standard of quality and 1 piece Universal control cabinet key
tested individually 1 piece Voltage tester screwdriver
Delivery: Technical data:
1 piece each VDE screwdriver slotted VDE certified: Yes
2.5/3.5/5.5/8.0
52560... Ident. No. 300
●
Prod. Gr. 582
Hard tool case with tool assortment, 48 pieces
60 pieces
Execution: 1 voltage tester 3 x 65 mm
Highly impact-resistant ABS plastic 1 automatic wire strippers
With solid aluminium frame 1 safety knife
With castors and ratchet hinges 1 tweezers 110 mm
Lockable anti-tilt cylinder locks 1 all-purpose scissors
equipped with high-quality and robust ATORN, 1 side cutters 165 mm
ORION and branded tools 1 snipe nose pliers 160 mm
Advantage: 1 water pump pliers 240 mm
For heavy-duty use 2 machinist‘s hammers 200/500 g
1 combination pliers 180 mm
Delivery: 1 plastic hammer, 32 mm
1 jointed wooden ruler, 2 m 1 reamer, 100 mm
1 aluminium spirit level, 400 mm 1 scriber
1 tape measure, 3 m 1 flat chisel, 175 mm
12 combination spanners, widths 6/7/8/9/ 1 set of 6 (5 drift punches 2-6 mm / 1
10/11/12/13/14/17/19/22 mm centre punch)
3 slotted screwdrivers, 4.0 x 100/5.5 x 3 workshop files with case, 150 mm H2:
100/6.5 x 125 mm Flat/round/half-round
2 Phillips screwdrivers, PH 1/PH 2 8 hex. screwdrivers 2-10 mm
4 VDE slotted screwdriver, 2.5 x 75/4 x 1 metal saw blade with 300-mm blade
100/5.5 x 125/8.0 x 175 mm
2 VDE Phillips screwdrivers, PH 1/PH 2 1 screw clamp, 200 mm
52560... Ident. No. 500
●
Prod. Gr. 580
Hard tool case with tool assortment, 48 pieces
48 pieces
Execution: Delivery:
Highly impact-resistant ABS plastic 9 combination wrenches, size
With solid aluminium frame 8/9/10/11/13/14/15/17/19 mm, 2 Phillips screw-
drivers PH 1 x 80 mm, PH 2 x 100 mm, 1 hexagon
With castors socket wrench insert, long, with ball head size 1.5
Ratchet hinges to 10, 1 TX wrench set with ball head TX 9 to 40, 3
Lockable anti-tilt cylinder locks slotted screwdrivers 4.5 x 90 mm/6.5 x 125 mm/8.0
Equipped with high-quality and robust ATORN tools x 150 mm, 1 machinist‘s hammer, 500 g, 1 pair of
Advantage: combination pliers, 180 mm, 1 pair of snipe nose
pliers, 1 pair of side cutters, 165 mm, 1 pair of water
For heavy-duty use pump pliers, 250 mm, 1 aluminium handsaw bow,
300 mm, 10 saw blades for metal, 1 folding rule, 2 m
52560... Ident. No. 600
●
Prod. Gr. 582
Source: Hahn+Kolb Werkzeuge GmbH
1394 Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations.
