Page 7 - Industrial Tools Catalog (2)
P. 7
Lathe and circular grinder accessories \ Lathe centre, accessories
synchronous running self-centring taper, blunt version, taper angle 75°
Blunt version, 75° taper angle
Application: Taper angle 75°
For holding hollow bodies and tubes for lathe Self-centring taper and cone shank are fully hard-
machining. ened and precision-ground
Execution: Advantage:
Body type: blunt taper Maintenance-free owing to permanent lubrication
Morse Ø of Point Ø d Program- Taper Concen- Max. 22176...
taper size housing D (mm) ming di- length E tricity toler- workpiece Ident. No.
(mm) mension A (mm) ance (mm) weight (kg)
(mm)
MK 3 80 20 80 67 0.008 400 130 ○
MK 3 120 30 85.5 72 0.008 600 135 ○
MK 4 80 30 81.5 83 0.008 400 140 ○
MK 4 120 50 87 90 0.008 800 143 ○
MK 4 170 30 107 72 0.01 1200 145 ○ D d
MK 5 120 30 88 83 0.008 800 150 ○
MK 5 170 50 106 90 0.01 1600 155 ○
Prod. Gr. 201
E
A
CoA face driver set
Diameter of clamping circle 12-50 mm, turning range 13-100 mm
Application: The centring point can be easily reground.
For stripping workpieces across the whole length The driving disc adapts to unevenness of up to 5°
without reclamping. angled workpiece faces thanks to the hydraulic
pressure compensation of the 3 support pistons.
Execution: The preloaded and axially-adjustable Belleville
Tip angle 60° washer pack balances out unevenness in centre
Max. workpiece weight 100 kg depths.
Centring point diameters of 6 mm and 12 mm Delivery:
Advantage: Included in the wooden box: 1 modular face driver
Fast retooling to different workpiece diameters by basic body, 4 driving discs for clamping circle Ø 12,
changing the driving discs. 20, 32 and 50 mm
Taper shank Min. turning Max. turning Min. Max. Direction of 22208...
size range Ø (mm) range Ø (mm) clamping clamping rotation Ident. No.
circuit Ø circuit Ø
(mm) (mm)
3 13 100 50 12 Clockwise 230 ○ Appropriate centring points on request
rotation
4 13 100 50 12 Clockwise 240 ○
rotation
Prod. Gr. 204
p. 810
Driving discs, individual
Accessories for CoA face driver
Application: Notes:
For driving cylindrical components. Driving discs with interchangeable cemented carbide
driving plates on request.
Execution:
Driving disc directly meshed
Ident. No. 408–432
p. 810
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com 807
Availability subject to country specific rules and regulations.
