Page 99 - Industrial Tools Catalog (2)
P. 99
Hydraulic lifters \ Hydraulic tools
Hydraulic hand pumps
for double-acting cylinders
Application: Ready for operation with oil filling
For operating hydraulic cylinders. Dual-acting cylinder
Execution: Advantage:
The piston hand pumps comprise a pump unit, Automatic switch-over from low pressure to high
drain valve and oil reservoir. pressure range in two-stage pumps.
The pumps can be used with the pump head down-
wards both horizontally and vertically.
Model Number Max. Max. Feed Feed Effec- Connec- Weight 29701...
of steps working working volume volume tive oil tion thread (kg) Ident. No.
pres- pres- per per volume
sure 1. sure 2. stroke stroke 2 (cm³)
Level Level (cm³) (cm³)
(bar) (bar)
NPT
P-84 2 34 700 16.39 2.46 2200 3/8 11.8 090 ○
inch
Prod. Gr. 258
Air hydraulic single-piston pumps
For single-acting cylinders
Execution: Rotating oil connection
For single-acting cylinders Air connection, ¼ inch 18 NPT
For hand or foot actuation with built-in 3-way With pressure limiting valve
air valve that automatically holds the load in the With maximum operating pressure of 700 bar
event of air pressure loss. No idling as the pump
only works when oil delivery is required. When Delivery:
the set pressure is reached, the pump switches Pumps with oil filling
off automatically. The pump can be connected to
any compressed air network with a minimum air Notes:
delivery rate of 250 l/min. Caution! For safety reasons it is advisable to protect
With silencer the rocker switch of the pumps from falling objects
using a safety guard.
Model PA 133 PATG-1102 N
Effective oil volume (cm³) 589 2081
Min./max. feed quantity 0.13-0.65 l/min 1.00-0.160 l/min
Min. air pressure (bar) 4.1 4.1
Max. air pressure (bar) 8.3 8.6
Connection thread NPTF 3/8 inch - 18 NPTF 3/8 inch - 18
29703... Ident. No. 015 030
●
●
Prod. Gr. 258
High-pressure threaded connections
Application: For 700 bar operating pressure with connection (3/8 18 NPT)
For connecting hydraulic lines.
Notes:
Execution: Width across flats 25.5 mm, ref. no. 29724 290, 310 and 320.
for 400 bar operating pressure with connection (¼ 18 NPT)
Ident. No. 200 Ident. No. 220
Ident. No. 040-070
Ident. No. 260 Ident. No. 290 Ident. No. 310 Ident. No. 320
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com 899
Availability subject to country specific rules and regulations.
