Page 232 - Icon Ridge Consumables and Tools for Cleaning Catalog

Chemical products

Mirror - Adhesive Tape

• Ideal for the sticking of mirrors and even plastics on glass, wood,
metal, stone and plexiglass
- suitable for dispenser and holder fastening in sanitary areas, for the
fixation of bars etc.
• Also suitable for Number Plate Fixing
• Double-sided high-grade acrylic adhesive
- stong adhesive at the beginning and secure final adhesion
• Carrier material made of 1 mm strong copolymer foam
- non-ageing and UV-resistant
- temperature resistant from -40 °C to +80 °C
Assembly advice:
• For mirrors the adhesive stripes must be applied vertically and in
several stripes
• Shear and pulling force are reduced and have to be spread evenly
onto the whole surface

Technical Data
Application quantity:
Mirror surface/ cm² Mirror thick- Mirror thick- Mirror thick- Mirror thick-
ness 3 mm ness 4 mm ness 5 mm ness 6 mm
100 1.5 cm 2 cm 2.5 cm 3 cm
200 3.5 cm 4.5 cm 6 cm 7.5 cm
500 9 cm 12 cm 15 cm 18 cm
1000 18 cm 24 cm 30 cm 36 cm
2000 36 cm 48 cm 60 cm 72 cm
5000 90 cm 120 cm 150 cm 180 cm
10000 180 cm 240 cm 300 cm 360 cm
The indicated application lengths must be distributed at every vertical

Article No. Article Description
6450 5995 RO(15M)MIRROR ADHES.TAPE B25MM

Transfer-Adhesive Film

• Double-sided transferable, universally applicable adhesive film
• The transfer adhesive film has high adhesive strength and is mainly
used in the glue vehicle emblems/logs again on vehicles
• Compared to common, double-sided adhesive film, the adhesive film
only adheres to the applied surface so that also complex shapes of
the contours is being omitted
• Temperature resistant from -30 °C to 105 °C (short term up to +180
°C)
• Good UV resistance
• Dimensions: 300 x 50 x 0.04 mm
Application:
• Detach the logo/emblem which should be reused - remove any
residues, then clean the bare area using a non relubricating cleaning
agent (e.g. ASK cleaning agent Art. No. 6110 1000)
• Remove the protective film from the transfer adhesive film as far as
required and place the adhesive side to the top on a level surface
• Place the rear side of the logo/emblem on the adhesive surface and
press it into place
• Then pull off the logo/emblem from the adhesion surface, position it
on the vehicle and evenly press it into place

Article No. Article Description
6450 5600 PK(10) TRANSFER-ADHESIVE FILM

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 232