Page 60 - 02-11-2020_2

03 | DETAILING AND PAINT CORRECTION
Paint correction

PMP 20
2,0 mm

DRF 10
PMP 21
1,5 mm

PMP 22
CNS 12
1,0 mm
10p.
DRF 05 100p.
DRF 50 CNS 10

DUST REMOVAL FILE TOUCH-UP TIPS CLEANING NEEDLE SET

DRF 05-10 PMP 20-21-22 CNS 10

• A dust file made of very hard metal for removal of dust and • 100 touch-up tips packed in a convenient and dust-free • A set contains one penholder with 10 replacement
dirt from dried paint. dispenser. needles, individually packed in a blister.
• Simply lay the file flat down on the surface and gently • Ideal for touching up small paint damage and stone chips. • The needles have microscopic small hooks which make
cut the contamination out of the paint with a minimum of • The plastic shaft with plush-free tip is disposable, it possible to remove dust and dirt from wet paint.
damage. convenient and cheaper than a classic brush. Always a
clean tip at hand!
• Can also be used as a pencil. By changing the pressure, you
DUST REMOVAL FILE APPLICATOR REPLACEMENT NEEDLES IN A BLISTER 10P
receive a bigger or smaller print. Ideal for making small
DRF 50 lines. CNS 12
• Thickness of the applicator = 3,28mm
• Applicator to be used in combination with DRF10.
• The magnet inside the applicator makes sure the file stays
AVAILABLE IN 3 THICKNESSES:
fixed during application.
blue (regular) PMP 20 = 2,0mm
• The applicator can also be used in combination with the
yellow (fine) PMP 21 = 1,5mm
SPDM sanding flowers. Stick the SPDM to the flat side of the
white (very fine) PMP 22 = 1,0mm
applicator and you are ready to go.
62