Page 22 - TOWER Code
P. 22

18                  J u m e i r a h V i l l a g e - t o w e r s D e v e l o p m e n t C o d e 		  october 2006  JUMEIRAH VILLAGE LLC

general provisions  A.	Vehicle stacking areas must be provided on-site and may
                         not impede on or off-site traffic movement.

                    B.	The number of vehicles to be considered in the vehicle
                         stack shall be determined in coordination with Jumeirah
                         Village LLC.

                    Section 6.05.	 Loading Areas

                    6.05.01.	 Location of Loading Areas
                    Loading areas shall be located beyond the view of the
                    general public as determined in Table 6.01, General Parking
                    Requirements.

                    A.	Bus and taxi pick up/drop off areas shall be permitted in
                         areas visible to the general public.

                    B.	The right-of-way shall not be used as a location for
                         general loading or unloading of goods and services. No
                         part of any vehicle shall be permitted to extend into a
                         local or primary street during loading or unloading.

                    6.05.02.	 Typical Space Requirements
                    A.	Loading spaces shall have a minimum width of 3

                         meters and a length of 12 meters, exclusive of aisle and
                         maneuvering space.

                    B.	Loading spaces shall have a minimum vertical clearance
                         of 5.5 meters.

                    C.	Inside turning radius shall be a minimum of 9 meters.

                    6.05.03.	 Semi-Trailer Space Requirements.
                    A.	Loading spaces shall have a minimum width of 3.5m

                         and a length of 17m, exclusive of aisle and maneuvering
                         space.

                    B.	Loading spaces shall have a minimum vertical clearance
                         of 5.5m.

                    C.	Inside turning radius shall be a minimum of 12.5m.

                    6.05.04.	 Design of Loading Areas
                    Loading areas shall be screened from the view of the general
                    public and designed to fit appropriately into the design theme
                    of the surrounding structure.
   17   18   19   20   21   22   23   24   25   26   27