Page 12 - MN_011947_R00_400 TRIO_SITE

Installation

CAUTION: All connections to power supply, input and output connectors must be
carried out only with amplifier off.

Recommended wire gauge & fuse
Positive / negative power supply cable ________________________________ 11 AWG
Output cables wire gauge (LOW OUT) _________________________________13 AWG
Output cables wire gauge (MID OUT / HIGH OUT) _______________________ 15 AWG
Remote cable ____________________________________________________ 18 AWG

Protection fuse or circuit breaker________________________________________ 20A
Wire gauge calculated based in a 13,12 feets maximum lenght. For greater distances,
increase the cable gauge to avoid power losses.
Caution: Using wire gauges below the recommendation will result in power loss and
overheating of wiring.
Check polarity and never reverse power supply cables due to the risk of damage to the
amplifier.
It is compulsory to install a protection fuses or circuit breakers as close as possible from
batteries.

Head Unit

Remote Cable 18 AWG

Wire Input:
If you choose to use this input, you won’t
GND
need to connect the RCA’S cable and
remote signal.
12V
*Illustrative images
11 AWG 11 AWG

RCA Cable
Taramps
LOW OUT
2,5mm² (13 AWG) MID OUT
1,5mm² (15 AWG) HIGH OUT
1,5mm² (15 AWG)

Three way box

Note: The 400 TRIO has a built - in passive filter for in each MID and HIGH outs..
11