Page 1216 - Master Catalog 2017, Inch

High-Performance Solid Carbide End Mills
Trochoidal Milling

„ Conventional Slotting

• Full slotting limitations:
— Usually not more then ap = 1 x D.
— Conventional and climb milling at the same time.
— High heat development on the tool and on the workpiece.
— Diffi cult chip evacuation.
— High radial forces.
• This Means:
— No constant chip thickness.
— Low MRR.
— Surface quality from the left to right side are different.
— Limited tool life.
— High power and torque requirements for the machine.

fz = feed per tooth [IPT]
n

Feed direction

hm = average chip thickness [in]

M160 widia.com

Hi hP f
M160 M161 Mi h REBRANDN
V
i
16 S lidE dMilli
WID M
L WID_Master16_SolidEndMilling_HighPerformance_M160_M161_Minch_REBRAND.indd 160 b 1020151109AM 11/11/15 9:40 AM