Page 589 - Master Catalog 2017, Inch

Separator Inserts
™
Feed Values for Grooving

2
2
Separator • X and X -Ultra .012
.011
.010
™
This insert has the same geometry as the WMT-SX . Chip
.009
control geometry offers the widest range of speed and feed
capabilities and provides excellent fl atness and fi nish. This .008
chipbreaker cuts with the least amount of tool pressure, feed rate [inch] .007
extending tool life. The geometry also includes wipers and .006
X 2 a corner radius. This geometry works well on a variety of .005
materials.
.004
.003
This insert has the same geometry as the WMT-SX-Ultra. The
2
2
X -Ultra is an enhanced version of the X and is ideal for stainless .002
®
steels, nickel-based alloys, tool steel, INCONEL , and titanium. .094 .125 .187
width of cut [inch]
X 2 -Ultra
1 Recommended Starting Feed

2
2
Separator • S and S -Ultra .012
.011
.010
.009
High positive rake with a more open chipbreaker enables
increased speeds and feeds for moderate- to high-speed .008
applications. The geometry includes wipers and a corner feed rate [inch] .007
radius that provides superior fl atness and fi nish. This insert .006
is also available with sharp corners. Its greatest strengths .005
S 2 can be seen on stainless steels and soft gummy steels. .004
.003
2
2
The S -Ultra is an enhanced version of the S and is ideal
.002
for 300 series stainless steels, nickel-based alloys, tool steel,
INCONEL, and titanium at moderate to high speeds and feeds. .094 .125 .187
width of cut [inch]
1 Recommended Starting Feed
S 2 -Ultra

Separator • Classic and F 2
.012
.011
.010
A good general-purpose insert for carbon steels, alloy steels, .009
and most stainless steels. The Separator Classic chipbreaker .008
is designed to perform well at moderate to slow speeds and .007
feeds. The Classic provides standard high lead angles and sharp feed rate [inch]
corners, making it the fi rst choice when choosing an insert for .006
Classic nib-free cut-off. .005
.004
.003
This insert provides superior fl atness and fi nish on a wide variety
.002
of materials Ideal for thick wall parts or cutting off larger diameter
2
parts to center. The Separator F performs well at slow to .062 .094 .125 .157 .188
moderate speeds and feeds. width of cut [inch]
F 2 1 Recommended Starting Feed

widia.com E117

b 92015328PM
WID_Master16_Turning_Grooving&CutOff_E116_E117_Minch_REBRAND.indd 117 L V i WID M 16 T i G i &C Off E116 E117 Mi h REBRANDN 11/10/15 11:14 AM