Page 877 - Master Catalog 2017, Inch

Slotting Mills M16 P

Slot Width Range: M
11–21,9mm K

Indexes per insert: 2
Diameter: 25–50mm

Pages: J4–J7

These products are available for metric only.

„ Insert Offering

Inserts with positive
chipbreaker providing
low cutting forces.

T-Slotting

Steel Cast Iron
• If machining a vertical slot, minimize depth; reference Figure 1. • Fewer problems with chip evacuation and reduced
If the depth is greater than Figure 1, chip evacuation problems cutting forces enable deeper vertical slots as shown
could occur. in Figures 2 and 3.
• Vibrations could occur when the T-slot cutter diameter increases;
use Figure 1 as the starting point. If vibrations are a concern,
adopt the Figure 2 solution.

Figure 1 Figure 2 Figure 3

1–3mm C/2

C

NOTE: Air blast is recommended to disperse the chips.

widia.com J3

11/10/15 10:33 AM
WID_Master16_IndexableMIlling_SlottingMills_J002_J003_Minch_REBRAND.indd 3 L V i WID M 16 I d bl MIlli Sl i Mill J002 J003 Mi h REBRANDN b 102015930AM