Page 515 - APEX MRO Products

POWER TOOLS

Industrial Safety Welding Oilfield Construction

Diamond Coring Motors Carbide Bur Bits

F•eaFtourrdeisa:mond coring in reinforced concrete, Features:

tile, masonry, or natural stone. • Manufactured in compliance with the highest quality standards.
• Outstanding quality, long service life and excellent stock
• Clutch protection protects gears
removal performance allow for economical work with
and motor against overload. diverse materials, delivering excellent results.

• Triple reduction gearing on all models. • Easily identified by laser‑imprinted EDP number, SCTI
• Dual torque/speed ranges.
• All ball and roller bearings. number and cut information on the shank.
• Built‑in water swivel all models.
• Packed individually in a sturdy reliable plastic box that
Test & Approvals: Complies with OSHA and UL Requirements
Control Type: On/Off ‑ 2 Speed protects the quality of the cutting edges.
Motor Protection: Clutch
NEMA/IEC Configuration: NEMA Twist Lock Plug; L5‑20P • Enhanced labeling technology ensures that the imprinted
Speed: 450 rpm; 900 rpm
Voltage: 120 VAC label information will remain readable permanently.
Cut Type: Alternate Diamond
SKU Amps Arbor Thread‑TPI or Pitch Cutting Length: 1 in
495‑4096 20.00 A 1 1/4 in ‑ 7 Cutting Dia: 1/2 in

SKU Shank Dia Cutting Edge Material
419‑24722 1/4 in Submicrograin Solid Carbide

Impact Wrench Utility Pole Auger Bits Ball Bearing Chucks POWER TOOLS

F•eaStiunrgeles:spur, cutter, and side lip bore through creosoted poles F•ea1t‑uprieecse: fluted sleeve construction.
• Ball trust bearing reduces friction in chuck closing mechansim.
without clogging, binding, or stopping to clear chips. • Through‑hardened sleeve teeth, nose, and keyholes for wear resistance.
• Maximizes gripping force and drilling accuracy.
• Extra‑long twist is ideal for boring large poles, construction • Treated to ensure thread life and high gripping surface hardness.
• Jaws center‑ground for absolute straightness and alignment.
timbers, and for multiple timber applications. • For heavy‑duty, close tolerance production drilling.
• For production drilling equipment, jig borers,
• Hex shank design for use in impact wrench drills.
• Full‑length heat treated bit guards against bending in heavy‑duty milling machines, lathes, and radials.
Mechanism: Ball Bearing
applications and strengthens the twist where the greatest strain occurs. Finish: Fluted Sleeve

• Bit can be resharpened.
• Medium‑fast screw point ideal for general woodboring applications.

SKU Shank Type Cutting Dia Overall Length Dia.
18 in 13/16 in
585‑47913 Hex 13/16 in

Power Drill Power Pole Auger Bits SKU Type Capacity Capacity Overall Overall Key Housing Mounting
Length Length Size Diam Jacobs
Features: 0.04 in 1/2 in K3 2.4 in 3JT
403‑30221 Keyed (mild (mild 2.97 in 3.88 in Female
• Single spur, cutter, and steel) steel) 2.6 in Jacobs
3JT
side lip design bore 403‑30227 Keyed — — 3.26 in 4.31 in K4 3 in Female
through creosoted Jacobs
poles without clogging, binding, or stopping to clear chips. 4JT
Female
• Extra‑long twist is ideal for boring large poles, construction

timbers, and for multiple timber applications.

• All bits feature 7/16” adaptable hex shank.
• simply remove it to use round shank.
• Full‑length heat treatment guards against bending in heavy‑duty

applications and strengthens the twist where the greatest strain occurs.

• Bit can be resharpened.
• Medium‑fast screw point ideal for general woodboring applications.

Shank Dia: 7/16 in

SKU Shank Type Cutting Dia Overall Length Dia. 403‑30233 Keyed 1/8 in 3/4 in 3.95 in 5.12 in K4
585‑47009 Cylinder+Hex 9/16 in 29 in 9/16 in (mild (mild
steel) steel)

© 2016 1.800.678.6577 513