Page 781 - APEX MRO Products

Industrial Safety Welding Oilfield Construction WELDING SUPPLIES

Flash Arrestors

985-G Gas Metal Arc FlameBuster™ Flashback Arrestors
Welding Wires
•FeaFtourraelsl :oxygen and fuel welding and cutting torches.
•FeaGteunreersa:l purpose hardfacing alloy. • For preventing flashback from torch to hose.
• Offers a good balance of impact • Gas tight O‑ring seal.
• Threads for connection to torch or regulator.
and abrasion resistance.

• Can be used in both metal‑to‑earth applications.
• Deposits are martensitic and forgeable but not readily machinable.
• Can be applied to carbon, low alloy, and manganese steels.
• Magnetic on carbon and low alloy steels.
• Analysis and properties are similar to Stoody

Self Hardening covered electrode.

SKU Material Dia.
341‑11423100 Alloy 1.2 mm

GAS CUTTING & WELDING SKU Gas Type Style
341‑0656‑0004 Oxy/Fuel Regulator Mount
Check Valves 341‑0656‑0001 Oxy/Fuel
Torch Mount

Regulator Bushing Adaptors Flashback Arrestor Bodies WELDING SUPPLIES

•FeaEtausrielys:mounts on outlet bushing on a regulator having a B‑Size outlet. •FeaEtxutrinegsu: ish flashes or flames before
• This model has the same flow capacity as the torch ‑ type
they reach the cylinder.
(1200 SCFH at 50 PSIG) when installed on a regulator.
• Can be used in any lead not
• Check valve is easily seen and is less subject to
exceeding 3/8” pipe in size which connects an acetylene
contamination, abuse and damage. cylinder to a regulator, manifold or other equipment.
Test & Approvals: Meets or Exceeds CGA and OSHA Requirements.; UL Listed
Pressure: 50 PSIG • Rated flow capacity is 40 SCFH with a 5 PSIG pressure drop.

Thread ‑ TPI or Pitch: 1/4 in NPT (F)
Used With: Flash adapter body compatible with 1/4 NPT

SKU Gas Type Style
312‑FA‑2 Acetylene 1/4 NPT Female x 1/4 NPT Female

SKU Connection Type Flashback Arrestor Sets
312‑CV‑31L Female/Male
F•eaCtoulroers‑c: oded for gas service
Cutting Machines
to provide added safety.
BHA-2 Adjustable
Head Attachments • Internal check valves designed to

•FeaAtdudrsesf:lexibility to machine cutting torches by allowing prevent reverse flow and accidental
mixing of oxygen and fuel gases.
bevel cuts without changing the position of the torch.
• Torch and regulator
• Setting angle: between 0° to 90° at either side of vertical.
models provide downstream and upstream protection.
SKU
341‑0383‑0012 • 10” maximum cutting capacity.
• For stopping flashbacks by preventing ignition of mixed gases and

to protect equipment such as hoses, regulators, and cylinders.
Test & Approvals: UL Listed
Thread ‑ TPI or Pitch: 9/16 in ‑ 18 TPI
Used With: Oxygen/Fuel Gas Lines

SKU Gas Type Style
312‑FA‑30 Oxygen/Fuel Gas Regulator Adaptor
312‑FA‑10 Oxygen/Fuel Gas
Torch

© 2016 1.800.678.6577 779