Page 79 - 2019 Technical NMT Hybrid4

HYBRID4 – Model Outline – Emission Control System
GPF rejuvenation process 1/2

1. Start the engine and warm it up

2. Enter the PM rejuvenate mode PM Rejuvenate

using GTS PM is burned under

[Powertrain > Engine > Utility Excess fuel is injected Fuel in the high temperature

> PM Rejuvenate Mode] exhaust gas is condition
burned in TWC

3. Disconnect GTS and turn the

A/C switch on

Excess air
4. Drive the vehicle at 37 mph is taken High-temperature : PM

(60 km/h) or more until the exhaust gas : Oxygen

warning message is no

longer displayed on the

multi-information display