Page 144 - 12558 Drexler Builder Binder.pdf

Energy efficiency is gained by extending cycle time and reducing the
amount of wattage and water used during your dishwasher’s cycle. For IMPORTANT: If the door is opened to add
exceptional cleaning, cycles are longer due to the soak and pauses. a dish, (even during the Delay Hours option),
Several models contain an optical water sensor used to determine the Start/Resume button must be pressed
water and energy consumption for great cleaning performance. each time.
Efficient dishwashers run longer to save water and energy, just as If Start/Resume is located on top of door:
driving a car slower saves on gas. Your first cycle will run longer to Push door firmly closed within 3 seconds of
calibrate the optical water sensor. pressing Start/Resume. If door is not closed
within 3 seconds, the start button LED will
flash, an audible tone will be heard, and cycle
will not start.

Items in rack can block
the spray arms.

Premeasured Detergents
IMPORTANT: Remove leftover food, bones, toothpicks and other hard High quality premeasured tablets and
items from dishes. Remove labels from containers before washing. packs are recommended for improved
Make sure when dishwasher door is closed, no items are blocking performance.
detergent dispenser. Quality tablets and packs have been
Items should be loaded with soiled surfaces facing down and proven better than powder, liquid, or gel
inward to the spray as shown in the graphics above. This will detergents at reducing filming on dishes.
improve cleaning and drying results. Angle dirtiest dish surface Using tablets and packs over time will
downward, allowing space for water to flow up through rack and start to reduce or eliminate white film.
between dishes. They are suitable for all water hardness
and soil levels. Also, by using a rinse
Avoid overlapping items, like bowls or plates, that may trap food. aid, you can minimize repeat buildup of
Place plastics, small plates, and glasses in upper rack. white film (not all packs and tablets
contain rinse aid). Always place
Wash only items marked “dishwasher safe.”
premeasured detergents in main
To avoid thumping/clattering noises during operation: Load dishes compartment and close lid.
so they do not touch one another. Make sure lightweight load items NOTE: Follow instructions on the
are secured in racks. package when using other dishwasher
Additional loading patterns are available online at detergent types. See the complete
www.whirlpool.com. owners manual for more details about
powders, liquids, and gels.
Use slots in the covers and suggested loading patterns to keep Use automatic dishwasher detergent only. Add detergent just
your silverware separated for optimum wash. before starting a cycle.
Fresh automatic dishwasher detergent results in better cleaning.
Store tightly closed detergent container in a cool, dry place.

PUSH

Your dishwasher is designed to use rinse aid for good drying
performance. Without rinse aid, your dishes and dishwasher interior
When loading silverware, always place sharp items pointing down will have excessive moisture. The heat dry option will not perform
and avoid “nesting” as shown. If your silverware does not fit into the as well without rinse aid.
designated slots, flip covers up and mix silverware types to keep
them separated. Rinse aid keeps water from forming droplets that can dry as spots
or streaks. It also improves drying by allowing water to drain off of
NOTE: The AnyWare™ Silverware Basket can sit in the door for dishes after final rinse. Rinse aid does not adhere to dishware, and
completely usable rack space, letting you fit more items in the rack. when used, it is dispensed during each cycle.
It can also go in your lower rack to fit your needs.

3