Page 472 - Performance-Health-Canada-eCatalog-2018-2020

Material Stretch
Rolyan® Aquaplast®-T
Temperature Time
1⁄16” (1.6mm) 160° to 170° F (70° to 75°C) water for 35 seconds 3⁄32” (2.4mm) 160° to 170° F (70° to 75°C) water for 1 minute
1⁄8” (3.2mm) 160° to 170° F (70° to 75°C) water for 1 minute
3⁄16” (4.8mm) 160° to 170° F (70° to 75°C) water for 1 to 2 minutes
Moderate resistance
1⁄16” (1.6mm) 1 to 2 minutes of working time 3⁄32” (2.4mm) 2 to 3 minutes of working time 1⁄8” (3.2mm) 4 to 6 minutes of working time 3⁄16” (4.8mm) 4 to 7 minutes of working time
See page 471 for pinch technique.
1/12” x 18” x 24”
(2mm x 46cm x 61cm)
1/16” x 18” x 24”
(1.6mm x 46cm x 61cm)
Single Sheet
4 Per Case
Single Sheet
13% UltraPerf
Solid
13% UltraPerf®
19% OptiPerfTM
42% SuperPerf
Solid
13% UltraPerf®
19% OptiPerfTM
42% SuperPerf
Solid
081554955
081554948
A96254104 A96254C4
A96250C4
A96240C4
A962541 A96254
A96250
A96240
1/8” x 18” x 24” (3.2mm x 46cm x 61cm)
4 Per Case
Single Sheet
1% Perforated
19% OptiPerfTM
42% SuperPerf
Solid
1% Perforated
19% OptiPerfTM
42% SuperPerf
Solid
A96230C4
A96256C4
A96220C4
A9621
A96230
A96256
A96220
A96210
1/8” x 24” x 36”
(3.2mm x 61cm x 91cm)
1/8” x 6” x 18”
(3.2mm x 15cm x 46cm)
2 Per Case
Single Sheet
4 Per Case
1% Perforated
Solid
1% Perforated
Solid
Solid
A96273C2
A96272C2
A96273
A96272
A962081
Aquaplast®
For more information regarding 6”x 9” Aquaplast, please call Customer Service.
3/16” x 18” x 24” (4.8mm x 46cm x 61cm)
3/16” x 24” x 36” (4.8mm x 61cm x 91cm)
4 Per Case
Single Sheet
2 Per Case
Single Sheet
1% Perforated
Solid
1% Perforated
Solid
A96276C4
A96274C4
A96276
A96274
A96275C2
A96275
3/32” x 18” x 24” (2.4mm x 46cm x 61cm)
4 Per Case
Single Sheet
1% Perforated
19% OptiPerfTM
Solid
1% Perforated
19% OptiPerfTM
38% SuperPerf
Solid
564435
A96255C4
A96270C4
564434
A96255
A96271
A96270
Splinting Rolyan® Aquaplast®-T
Rolyan® Aquaplast®-T Handling Characteristics
The optimum combination of intimate conformability and resistant stretch
• 100% memory allows repeated reheating and economical splint revisions.
• 13% UltraPerf® perforation pattern is ideal for lightweight finger or hand splints requiring breathability.
• 19% OptiPerfTM perforation pattern provides superior ventilation for comfort while maintaining material strength and easy edge finishing.
• Clear when heated. Edges trim easily.
Bond-Ability
• Aquaplast®-T – For a temporary bond, pinch heated surfaces together; for a permanent bond, remove coating with liquid remover or by scraping with a sharp instrument or sand paper.
• Aquaplast® Original – bonds permanently when heated surfaces are pinched together.
Recommended Uses
• Ideal for serial splints
• Hand, wrist, finger and thumb splints
• Dynamic outrigger bases
• Elbow splints using the pinch technique
472
Splinting