Page 478 - Performance-Health-Canada-eCatalog-2018-2020

Material Stretch
Rolyan®
Aquaplast® ResilientTM
Temperature Time
1⁄16” (1.6mm) 150° to 160° F (65° to 70°C) water for 35 seconds 1⁄8” (3.2mm) 160° to 170° F (70° to 75°C) water for 1 minute
Maximum resistance
1⁄16” (1.6mm) 1 to 2 minutes of working time 1⁄8” (3.2mm) 4 to 6 minutes of working time
1/16” x 18” x 24” (1.6mm x 46cm x 61cm)
1/8” x 18” x 24” (3.2mm x 46cm x 61cm)
Color
4 Per Case
Single Sheet
4 Per Case
Single Sheet
Solid
13% UltraPerf®
Solid
Solid
Solid
A96262C4
A962611
A96262
A96263C4
A96263
White
1/16” x 18” x 24” (1.6mm x 46cm x 61cm)
1/8” x 18” x 24” (3.2mm x 46cm x 61cm)
Color
4 Per Case
Single Sheet
4 Per Case
Single Sheet
13% UltraPerf®
Solid
13% UltraPerf®
Solid
Solid
Solid
550139
A96440C4
550138
A96440
A96442C4
A96442
White
Aquaplast® ResilientTM For more information regarding 6”x 9”
Aquaplast Resilient, please call Customer Service
Splinting Rolyan® Aquaplast® Resilient
Handling Characteristics
Aquaplast® ResilientTM is a non-draping material that provides the control needed for proper conforming.
• Translucent when heated
• 100% memory allows repeated reheating and economical splint revisions
• Edges trim easily
• Latex free
Bond-Ability
• ResilientTM-T
–For a temporary bond, pinch heated surfaces together; for a permanent bond, remove coating.
• ResilientTM Original
–Bonds permanently when heated
Recommended Uses
• Splints that require revisions • Serial splints
• Large splints
• Splints for spasticity
• Elbow and back splints • Ankle stirrup splints
• Foot drop splints
Rolyan® Aquaplast®-T ResilientTM (with non-stick coating)
Aquaplast®-T ResilientTM (with non-stick coating)
Aquaplast® Original ResilientTM (without non-stick coating)
See pages 552-555 for Splint Pans to heat splinting material.
1/16” 19% Optiperf 1/16” 13% Ultraperf ®
478
Splinting