Page 480 - Performance-Health-Canada-eCatalog-2018-2020

Material Stretch
Rolyan® San-Splint®
Temperature Time
1⁄16” (1.6mm) 150° to 160° F (65° to 70°C) water for 35 seconds 1⁄8” (3.2mm) 160° to 170° F (70° to 75°C) water for 1 minute
Maximum resistance
1⁄16” (1.6mm) 1 minute of working time
1⁄8” (3.2mm) 3 to 5 minutes of working time
1/16" x 18" x 24"
(1.6mm x 46cm x 61cm)
1/8" x 18" x 24"
(3.2mm x 46cm x 61cm)
1/8" x 24" x 36"
(3.2mm x 61cm x 91cm)
Color
Single Sheet
Perforated*
Solid
Perforated*
Solid
Perforated*
Solid
A32460
A32461
A32455
A32452
A32457
A32456
Beige
–
–
A32441
A32440
A32445
A32444
White
1/16" x 24" x 36"
(1.6mm x 61cm x 91cm)
1/8" x 24" x 36"
(3.2mm x 61cm x 91cm)
Color
2 Per Case
Solid
Perforated*
Solid
A32469C2
A32457C2
A32456C2
Beige
–
A32445C2
A32444C2
White
1/16" x 18" x 24"
(1.6mm x 46cm x 61cm)
1/8" x 18" x 24"
(3.2mm x 46cm x 61cm)
Color
4 Per Case
Perforated*
Solid
Perforated*
Solid
A32460C4
A32461C4
A32453
A32451
Beige
–
–
A32441C4
A32440C4
White
* Perforation in White = 1% Beige = 21⁄2%
Splinting Rolyan® San Splint®
Rolyan® San-Splint®
Handling Characteristics
• Rubber-based isoprene material provides a high degree of control
• Can be worked aggressively without fingerprinting
• Excellent rigidity without reinforcement
• Can be softened in a hot air oven as well as in hot water.
Heat in oven at 175°F (80°C) for 2 to 3 minutes.
• Edges trim easily
• Latex free
Bond-Ability
• Bonds permanently when heated surfaces are pinched together (not coated, giving the fabricator an “extra pair of hands”).
Recommended Uses
• Ideal for medium to large splints • Spasticity splints
• Functional position splints
• Resting mitt splints
• Back supports • Body jackets • Foot orthotics
480
Splinting