Page 45 - CareerView_Construction_Sample_Pages

RESIDENTIAL CONSTRUCTION

C HOW TO TAPE AND MUD DRYWALL

1 Check to see that the drywall is 4 Roll out and cut a piece of 7 Smooth out and remove the
correctly attached to the studs. drywall tape. extra mud.
2 Make sure that all drywall screws 5 Press the tape into the mud. 8 Fill and smooth any screw
are countersunk. 6 Press and pull the drywall holes.
3 Apply mud into each seam. knife along the seam.

D HOW TO INSTALL A TOILET

1 Cut a hole in the sub floor the 4 Screw the collar to the sub 8 Lower and press the toilet bowl

size of the closet flange. floor. onto the wax ring.

2 Use PVC cement to connect 5 Solder the stop valve. 9 Bolt down the toilet bowl.

the flange to the soil pipe. 6 Insert the closet bolts with 10 Install the tank and hardware.

3 Twist and press the flange washers. 11 Install the supply line and the seat
so the collar is seated to the 7 Press the wax ring over the assembly.
fl oor. fl ange.
27

M02B_MOLI3098_SE_U02A.indd 27 01/05/20 12:48 AM