Page 120 - ToolWEB Catalog 2015 2nd Qtr
P. 120
SHOP TOOLS & EQUIPMENT
Drill Presses
KTI63703 $239.79 KTI63716 $385.63 SUN5000A $634.25
4 Ton Portable Ram Kit Air Hydraulic Foot Pump 16 Speed Drill Press with 3/4 HP Motor
• 4 ton portable ram kit for spreading, bending, push- • 10,000 PSi air/hydraulic foot pump • Heavy duty 3/4 HP motor
ing, and clamping applications requires 90 PSi air pressure with 5-1/8" drill capacity
• 7,250 PSi hand pump and 10.5" long • Designed to be used with single acting cylinders • Convenient belt tension lever
• Provides hands free operation for pumping
ram with 4.75" stroke for quick speed transition
• Basic attachments, .5 ton spreader ram, and releasing load • Table rotates 360 degrees and pivots
• Usable fluid capacity 98 cubic inches
and five extension tubes included • Flow rate 42 cu. in. with no load, 8.5 cu. in. with load from 0 degrees to 45 degrees on each
• Snap-fit design for quick attachment • Complies with ASME PALD/2009 safety standards side with indicator to facilitate setting
• 2 Year Warranty on material and workmanship • UL and CSA listed
and tube connections
• Complies with ASME ASP-2010 Safety Standards KTI62114 $108.99 JET354402 $1,299.00
• 2 Year Warranty on material and workmanship
700 Lb Engine Support Bar JET J-2550 20" Floor Model Drill Press
KTI63709 $319.99 • 700 pound capacity • Cast iron head
• Transverse support bar adjusts from 34.5" to 61" • Large quill
10 Ton Portable Ram Kit • Designed to support front wheel drive engines • Head casting features a permanently
• 10 ton portable ram kit for spreading, bending, push-
for repair or motor mount replacement lubricated ball bearing spindle assembly,
ing, and clamping applications • includes support leg for heavier engines or engines using four heavy duty ball bearings
• 8,050 PSi hand pump and 12.6" long in an enclosed quill for longer life
requiring three point support • Massive T-slotted production work
ram with 5.12" stroke • Complies with ASME PALD/2009 safety standards table (Model J-2550 only)
• Basic attachments, .5 ton spreader ram, • 2 Year Warranty on material and workmanship • Table tilts 45 degrees
• Not available for sale in Canada
and four extension tubes included KTI62115 $55.99
• Force gauge to measure force applied to work JET354550 $2,130.00
• Snap-fit design for quick attachment 1500 Lb. Engine Sling
• 1500 lb. capacity engine sling JET J-A5816 15" Variable Speed Floor
and tube connections Drill Press, 1 HP, 115-230V, 1 PH
• Complies with ASME ASP-2010 Safety Standards for use with an engine crane • Speeds from 400 to 5000 RPM
• 2 Year Warranty on material and workmanship • Designed to level a load or adjust at a specific • Handwheel adjustment sets
angle for installation and removal the speeds
• Four mounting chains and brackets • Large 2-1/4" quill allows
for quick attachment to engine greater accuracy
• Complies with ASME PALD/2009 safety standards • 3" column diameter for maximum
• 2 Year Warranty on material and workmanship
head support
Long Rams KTI62116 $116.95 • Full bearing support on quill
• Load-limiting and bypass valves to prevent over-
1000 Lb Engine Support Bar for maximum spindle stiffness
loading and over extension of ram • Designed to support front wheel drive engines for re- • Not available for sale in Canada
• Long handle for easy pumping effort under load
• Complies with ASME PALD/2009 safety standards pairs or servicing of engine mounts
• 2 Year Warranty on material and workmanship • includes a 700 pound capacity transverse bar that ex-
KTI63414 - 4 Ton $96.41 tends from 34.5" to 61"
• includes a support leg for handling larger engines or
• 4 ton long ram bottle jack for farm applications and
replacement power unit for engine cranes engines requiring three support points
• Engine attachment and adjustment hardware included
• Lift range from 19.7" to 34.7". * Release valve slowly • Complies with ASME PALD/2009 safety standards
controls the lowering of load • 2 Year Warranty on material and workmanship
KTI63427 - 8 Ton $110.63
• 8 ton long ram bottle jack for farm applications and
replacement power unit for engine cranes
• Lift range from 24" to 42.7". * Release valve slowly
controls the lowering of load
132
