Page 57 - millerwelds catalog_2022

GTAW TIG

Dynasty 210/300 Series AC/DC TIG and Stick Industrial
®
Processes
See literature AD/4.81 (Dynasty 210) and AD/4.96 (Dynasty 300) TIG (GTAW) Stick (SMAW)
Pulsed TIG (GTAW-P)
TIG Welding Capability Air carbon arc (CAC-A) with 300 model
210 Max. 210 Max. Comes with
1/4 in. (6.4 mm) 1/4 in. (6.4 mm) 8 ft. (2.4 m) power cord (no plug)
Two 50 mm Dinse-style connectors
Steel Aluminum
Complete packages come with
210 Min. 210 Min.
8 ft. (2.4 m) power cord (no plug)
0.002 in. (0.05 mm) 0.012 in. (0.3 mm)
Quick-reference guide
300 Max. 300 Max. Small Runner ™ cart
3/8 in. (9.5 mm) 3/8 in. (9.5 mm)
See page 125 Coolmate ™ 1.3
Coolant (four 1-gallon bottles)
Steel Aluminum Wireless foot remote control
™
Weldcraft water-cooled torch kit
300 Min. 300 Min.
0.004 in. (0.1 mm) 0.012 in. (0.3 mm) Dynasty 210: W-250
Dynasty 300: W-280
Dynasty 300
Dynasty 210
Most popular accessories
2-Wheel Trolley Cart 300971
Intuitive LCD display. Ensures proper machine setup Pro-Set eliminates the guesswork when setting weld (pg 119)
™
and parameter selection. Informative on-screen parameters. Use Pro-Set when you want the speed, Small Runner ™ Cart 301615
explanations and dynamic images enhance the convenience and confidence of preset controls. Simply (pg 119)
Coolmate ™ 1.3 301616 (pg 119)
parameter selection process. select the feature and adjust until Pro-Set appears on
Coolant 043810 (pg 119)
Program memory allows easy naming, saving and the display.
recalling of favorite weld settings. AC waveforms (TIG) for advanced squarewave, soft
Locks and limits provide control of weld parameter squarewave, sine wave and triangular wave.

ranges minimizing deviation from the welding procedure AC balance (TIG) control provides adjustable oxide

specification (WPS). removal which is essential for creating the highest
USB. Front panel port provides the ability to easily quality aluminum welds. Contractor Kits (pg 124)
301309 A-150 w/RFCS-14 HD
update software, back-up settings and transfer saved AC frequency (TIG) controls the width of the arc cone
301311 A-150 w/RCCS-14
weld programs from one unit to the next. and can improve directional control of the arc.
301549 A-200 w/RFCS-14 HD
Allows for any input voltage Optional cooler power supply (CPS) is an integrated 301550 A-200 w/RCCS-14
™
hookup (210 models: 120-volt dedicated-use receptacle for the Coolmate 1.3.

120–480 V, 300 models: 208–600 V) with no manual
Cooler-On-Demand feature operates the auxiliary
™
linking, providing convenience in any job setting. Ideal
cooling system only when needed. Reduces noise,
solution for dirty or unreliable power.
energy use, and airborne contaminants pulled through
Blue Lightning high-frequency (HF) arc starter for the cooler. Only available on CPS models.
™
non-contact arc initiation. Provides more consistent arc Weldcraft ™ Water-Cooled Torch Kits
(pg 124)
starts and greater reliability compared to traditional
300185 W-250 (WP-20)
HF arc starters.
300990 W-280 (WP-280)
Lift-Arc provides AC or DC arc initiation without the Dynasty 300 Complete package 301268 W-375
™
use of high frequency. with wireless foot control and Remote Controls (pg 124–125)
CPS shown. 043688 RCCS-14 fingertip control
Auto-postflow adjusts the length of postflow time
194744 RFCS-14 HD foot control
based on the amperage setting, shielding your tungsten 301580 Wireless foot control
and eliminating the need to set the postflow time. Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Note: See page 41 in the Multiprocess section for Dynasty 300 Multiprocess.
*Additional packages are available — visit MillerWelds.com or your distributor.
**Refer to owner’s manual for complete ratings. ***Sense voltage for low OCV stick and Lift-Arc ™ TIG.
Welding Welding Rated Output at Amps Input at Rated Load Output, 50/60 Hz Max. Open- Net
Model/Stock Number* Process Input Power Amp Range 60% Duty Cycle 120 V 208 V 240 V 400 V 460 V 480 V 600 V KVA KW Circuit Voltage Dimensions Weight
Dynasty 210 TIG 3-phase 1–210 210 A at 18.4 V — 16 14 8 — 7 — 5.7 5.2 80 VDC H: 13.88 in. 47 lb.
(907816) 1-phase 1–210 210 A at 18.4 V — 28 23 14 — 12 — 5.8 5.6 (11 VDC***) (352 mm) (21.3 kg)
Power source only W: 8.5 in. 50 lb.
1-phase (120 V) 1–150 125 A at 15 V 26 — — — — — — 2.8 2.7 (216 mm)
(907816001) Stick 3-phase 5–210 160 A at 26.4 V — 16 14 9 — 8 — 6.0 5.8 D: 21.88 in. (22.7 kg)
with CPS
Power source with CPS
AC/DC (951936) Complete with 1-phase 5–210 160 A at 26.4 V — 28 24 14 — 12 — 6.4 5.5 (555 mm)
wireless foot and CPS
5–100
1-phase (120 V)
27 — — — — — — 2.9 2.8
90 A at 23.6 V
Dynasty 300 TIG 3-phase 2–300 (AC) 250 A at 20 V — 19 16 10 8 — 7 7.5 6.6 60 VDC H: 13.88 in. 55 lb.
(907818) 1–300 (DC) (11 VDC***) (352 mm) (25 kg)
Power source with CPS 1-phase 2–300 (AC) 250 A at 20 V — 33 29 17 15 — 11 6.7 6.7 W: 8.5 in. with CPS
(216 mm)
(951937) Complete with 1–300 (DC)
D: 21.88 in.
wireless foot and CPS
Stick 3-phase 5–300 250 A at 30 V — ** ** 14 12 — 9 9.8 9.1 (555 mm)
1-phase 5–300 200 A at 27.2 V — 35 31 ** ** — ** 9.3 9.2
57