Page 92 - millerwelds catalog_2022

A FLE22 Cat P 92 Induction.qxp_Induction 1/20/22 7:48 PM Page 1

Induction Heating

®
ArcReach Heater Air-Cooled Induction System Industrial
Process
See literature IN/16.0 Induction heating
Suggested power sources
Field preheat and bakeout applications up to 600 degrees Fahrenheit (315°C).
XMT® 350 FieldPro ™ (pg 44)
Dimension ™ 650 ArcReach
(manufactured after 3/16/2021)
(pg 46)
Trailblazer® Series
(ArcReach models only) (pg 78)
Big Blue® Series
(ArcReach models only) (pg 81–84)
Most popular accessories
Air-cooled cable

ArcReach Heater Extension Cable
301451 10 ft. (3 m)
Air-Cooled Quick Wrap 301452
ArcReach Heater Air-cooled quick wrap Air-Cooled Cable
301453030 30 ft. (9.1 m)
301453050 50 ft. (15.2 m)
ArcReach Heater systems allow economical insourced ArcReach Heater is equipped with built-in temperature 301453080 80 ft. (24.4 m)
weld preheating and bakeout. The induction heating control allowing for either manual or computer-loaded Cable Cover
tools (air-cooled cables or air-cooled quick wraps) programming using up to six thermocouples. It can run 204611 30 ft. (9.1 m)
connect to the ArcReach Heater, which is powered by either one or two heating tools (air-cooled cable or 204614 50 ft. (15.2 m)
select on-site welding power sources. With ArcReach air-cooled quick wrap) at the same time. Requires 204620 80 ft. (24.4 m)
Heater systems you can: ArcReach Heater extension cable to operate.
Eliminate the costly overruns common with heating Air-cooled cables are designed with flexibility and
contractors efficiency in mind. Cables can be wrapped into coils of
Eliminate delays due to transitions between heating various shapes and sizes to fit any induction preheat or
and welding crews bakeout application (flat plate, pipe, odd geometries). Preheat Insulation
Run your own schedule without depending on 204669 1/2 x 6 x 120 in.
Air-cooled quick wraps provide a fast and easy way (1.3 x 15 x 305 cm)
third-party contractors
to wrap a pipe joint (up to 10-inch diameter) for 195376 1/2 x 6 x 240 in.
Use existing on-site welding equipment up to 200 feet (1.3 x 15 x 305 cm)
preheat and bakeout. Simply place around the pipe,
away as the heating power source 211474 1/2 x 12 x 120 in.
connect the ends, and cinch the clip as close to the
Lower preheating and bakeout costs (1.3 x 31 x 305 cm)
pipe as possible.
Automatically and accurately document joint
Durable high-temperature materials. Air-cooled
temperatures
cables and quick wraps are designed to withstand the
Eliminate safety concerns caused by traditional
tough conditions in both industrial and construction
resistance and open-flame heating
applications.
Easy setup with flexibility to fit a variety of pipe diameters, Preheat Insulation w/Cable Harness
Preheat and bakeout programs can be manually 301334 1/2 x 16 x 120 in.
plates or odd geometries.
entered or loaded via USB drive. (1.3 x 41 x 305 cm)
Time-to-temperature is faster than conventional Series Cable Adapter 195437
Heating data is automatically recorded and can be
processes due to the method of applying heat, reducing High-Temperature Rope 194965
used in quality control and documentation needs.
cycle time. Temperature Measurement
(two options available)
Uniform heating is maintained along and through the
Contact Thermocouple Sensor (Probe)
heat zone by using induction heat within the material. 301517 OR welded on thermocouples
The surface of the part is not marred by localized which require 500 ft. (152 m)
conducted heat at higher than specified temperatures. Thermocouple Wire 194999,
Thermocouple Connectors (10 pack)
Improved working environment during welding. Welders 195098, and Thermocouple
are not exposed to open flames, explosive gases and Attachment Unit 194959
hot elements associated with fuel gas heating and Visit MillerWelds.com for more information
resistance heating. selecting Miller® induction heating options
and accessories.
Stock Number Output Output Source Output
(301390) Heater only Input Power Current Voltage Current Frequency Rated Output Heater Dimensions Heater Net Weight
(requires ArcReach Heater extension Operates on open-circuit voltage: 50–70 V 200 A 300 V 33 A 5–30 kHz 7.8 kW at H: 18.6 in (472 mm) 43 lb. (20 kg)
cable to operate) provided by an XMT 350 FieldPro or an 100% duty cycle W: 11.2 in (285 mm)
(951848) Heater w/extension cable ArcReach-equipped engine drive or a D: 26.7 in (678 mm)
(951849) Heater w/extension cable Dimension 650 ArcReach manufactured
and two air-cooled quick wraps after 3/16/2021
92