Page 150 - ToroProductCatalogue2016

Punches, Plugs and Clips
A range of punches and accessories are available to suit the commercial installation of drippers. We also have repair plugs and clips.
10142325: 4 mm Goof Plug
101L24A: Hole Punch
101UP3 and 101UP4: Universal Hand Gun Punch
• For low density polyethylene pipes with diameters between 12 to 32 m
• Size adjustment simply by turning the dial at the base of the punch
• Strong and sturdy design
• Blade is made of hardened and sharpened steel
VC16, VC20: Trellis Clip
101P3, 101P4: Hole Punch
• Two models available:
101UP3 – 3 mm hole suitable for 4 mm barbed fittings
101UP4 – 4 mm hole suitable for 5 mm barbed fittings
Ordering Information
Code
Description
10142325
4mm Goof Plug (code is for one rack of 10 plugs)
FPG02
Double sided Goof Plug – 5mm x 8mm (suit Drip or Waterbird® repair)
10142315
Key punch
101L24A
Punch – 5mm Ag style, plastic, suit Waterbird® and 1011057 barbed off-take
101P3
Hole punch (green) to suit 4mm barbed emitters
101P4
Hole punch (blue) to suit 5mm Waterbird® barb
101P5
Hole punch suits DT0813 and some Antleco fittings
DT08TOOL
8mm hole punch and insertion tool. Suits DT0813
VC16
16mm Trellis clip to suit 13mm poly and 16mm Drip-In®
VC20
20mm Trellis clip to suit 19mm poly, 19mm DripMaxx® and 20mm Drip-In®
101DI20
Emitter blanking clip to suit 20mm Drip-In®
101DX25
Emitter blanking clip to suit 25mm DripMaxx®
101UP3
Universal Hand Gun – suits 4mm barbs
101UP4
Universal Hand Gun – suits 5mm barbs
policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009. Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
Applications
Plugs are used to repair wrongly punched holes. Trellis Clips are used to fasten drip lines to the trellis wire.
10142315: Key Punch
101DI20: Emitter Blanking clip, suits 20mm Drip-In®
101DX25: Emitter Blanking clip, suits 25mm DripMaxx®
DT08TOOL: 8mm Punch and Insertion tool. Suits DT0813 take-offs. Punches a hole and inserts the take-off in the same action.
101P5: 5mm Hole Punch Ergonomic handle with coupon ejector. Suits DT0813 and some Antelco fittings
150
Company