Page 151 - ToroProductCatalogue2016

Punch and Inserter
Insertion Tool for Micro Fittings and Emitters
101INSERTER
101LFC16
Ordering Information
Code
Description
101INSERTER
Insertion Tool for inserting Micro fittings into Micro Tube
101LFC16
Layflat Cutter – 16 mm hole size
ications may be made without notice and without incurring liability. Please refer to www.toro.com.au 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
151
Applications
A great solution for inserting poly fittings, drippers and sprinklers into 4 mm low density polyethylene tube.
Suitable for gardeners, garden
owners, landscape contractors and agriculturalists.
Operating Instructions
1. Choose the right-sized hole in the drum for the fitting by pulling the drum down and turning it, align it with groove in the grips. Release your hold on the drum and it clicks into place.
2. Place the tip of the fitting into the tube and fit in position in the tool. By squeezing the handles of the tool the fitting is pushed firmly into the tube.
3. At the end of the tool is a cutting blade for cutting the poly tube to its required length.
Layflat Cutter
Applications
This is a small efficient tool with a special geometrically constructed cutting blade to facilitate the holing of layflat hose.
Features
• The tool is lightweight, compact and strong, and easy to hold in the palm of the hand
• The waste plastic does not fall into the hose and is discharged from
the tool
• This tool cuts a 16 mm hole
• Suits the 1014099 (16 mm tape × double spigot layflat adaptor) and 1014115 (22 mm tape × layflat adaptor)
Company policy is one of constant improvement and therefore changes in specif Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009. Phone