Page 151 - Miele Combi Steam Oven

Problem solving guide
Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed.
The following guide may help you to find the reason for a malfunction or a fault, and to correct it.
Problem
Cause and remedy
You cannot switch the appliance on.
The fuse has tripped.
 Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse rating).
There may be a technical fault.
 Disconnect the appliance from the mains connec-
tion for approximately 1 minute by:
– Tripping the relevant mains fuse or unscrewing
the fuse completely, or
– Switching off the residual current protection
device
 If, after resetting the trip switch in the mains fuse box or the residual current protection device, the steam oven will still not turn on, contact a qualified electrician or Miele Service.
The oven compartment does not heat up.
Demo mode is active.
The steam oven can be operated, however, the heat- ing elements will not work.
 Deactivate demo mode (see “Settings – Show-
room programme”).
The oven compartment has been warmed up by a warming drawer in operation underneath it.
 Open the door and let the oven compartment cool
down.
The fan can still be heard after the appli- ance has been switched off.
The fan is still running.
The appliance is fitted with a fan which removes steam from the oven. The fan will continue to run for a while after the appliance has been switched off. It will switch itself off automatically after a while.
151