Page 152 - Miele Combi Steam Oven

Problem solving guide
Problem
Cause and remedy
The sensor controls do not respond.
You have selected the Display | QuickTouch | Off set- ting. So when the steam oven is switched off, the sensor controls do not respond.
 As soon as the steam oven is switched on, the
sensor controls will respond. If you want the sensor controls to always respond even when the steam oven is switched off, select the Display | QuickTouch | On setting.
The steam oven is not connected to the power sup- ply.
 Check that the steam oven plug is correctly inser-
ted into the socket.
 Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service Department.
There is a fault with the controls.
 Touch and hold the  On/Off sensor control until
the display switches off and the steam oven re- starts.
A humming sound can be heard during opera- tion and after switching off the steam oven.
This noise does not indicate incorrect operation or an appliance fault. The noise is made by water be- ing pumped through the system.
After moving house, the steam oven no longer switches from the heat- ing-up phase to the cooking phase.
The boiling temperature of the water has changed as the altitude of the new location for the appliance dif- fers from the old one by at least 300 m.
 To adjust the boiling temperature, you need to de-
scale the appliance (see “Care” in the “Cleaning and care” chapter).
During operation an un- usually large amount of steam escapes, or steam escapes from parts of the oven where it does not usually.
The door is not properly closed.  Close the door.
The door seal is not correctly fitted.
 Press it in all the way round the door to make sure
it is fitted evenly.
The door seal is damaged, e.g. cracks can be seen.  Replace the door seal.
This can be ordered from Miele (see the end of this booklet for contact details).
152