Page 20 - C:\Users\Jorge\Documents\Flip PDF Professional\Revista_ Oleo-hidrahulica\
P. 20
Accessories Valves
Suction Strainers High Pressure
t Sizes 3/4" - 3" NPT/SAE or with t 2, 3 and 4 way valves NPT, BSP or SAE
hose barb straight thread 1/8" - 2" Pressure ratings
t Plastic or steel endcaps 4,500 - 12,000 PSI
t 3 PSI Bypass version available t SAE flange valves 1/2" - 5" pressure
t Custom sizes are available ratings are 3,000 and 6,000 PSI
Filler Breather Ca s t Carbon steel construction, Delrin ball
t Pressurized or non-pressurized seats and Viton O-rings are standard,
t Plastic or Steel versions other material combinations available
t Bayonet and screw in styles. t Stainless steel 2 way valves available
3, 10, and 40 micron options 1/4" - 2" NPT/SAE. All valves can be
t Dipstick and Lockout Kits supplied with lock out kits.
Most valves can be supplied with
Desiccant Air Breathers
t Combines Air Breather and water Pneumatic or Electric Actuators.
removal filter
Fluid level Gauges
t 3", 5" and 10" bolt centers.
Medium Pressure
Special options include low level t 2 way valves in carbon steel
electrical indicator switch, from 1/4" - 2" in NPT.
temperature switches or dial Pressure Rating 2000 PSI.
thermometer
t Sight Glasses in metal/plastic
NPT and SAE
Low Pressure
Level Tem erature Switches t 2 way valves, sizes 1/4" - 4" NPT
t Tank Top installation t 1" to 4" SAE valves with a wide range
t 12", 18" or custom length of SAE adaptors available
t Can contain up to three level t 600 PSI WOG
and Temperature switches t Hot Stamped Brass Body
Accumulators t Teflon seats with Buna O-rings
t 3000/5000 PSI Bladder Accumulators t Low Pressure ball valve adaptors
t Capacities from 1Q to 15 Gallons simplify power unit design and
t ASME Specification manufacture
t Top/Bottom repairable
t Mounting Brackets Bladder kits
& Charging Kits available Flow Control Needle and Chec valve
SAE Port Flanges t High Pressure 5000 PSI and Medium
t 3,000 and 6,000 PSI, threaded, Pressure 3000 PSI series
socket weld, split and blanking t Pressure Compensated Flow
Control Valves
Motor Pum Ada tors t Sizes to 2"
t Lightweight Aluminum Casting for
vertical and horizontal mounts. t NPT, SAE or BSP threads
t Suitable for electric motors to 100 HP
t Models for gas engines available
t Suitable for all SAE pump mounts
Reservoir End Covers Gauge Isolator Valves
t Available in diameters 6" to 18"
t Stem or panel mount versions available
t Models 10" to 18" available with 3/4" t Single or multi-station
NPT drain
t Included one piece double lipped seal
