Page 24 - K4 PORTFOLIO

Fillers: -

• 3M – USA

08505 3M™ Fast 'N Firm Seam Sealer is a fast-setting seam sealer designed for sealing
exterior joints and seams. Our sealer adheres well to clean primed or painted metal. This
product comes in a 1/10-gallon cartridge. If saving time and boosting productivity are
important, this seam sealer is an ideal choice. It is paintable in only 45 minutes.

3M™ Polyurethane Seam Sealers are 1K moisture curing polyurethane products designed
for seam sealing applications in car body repair. These 1K sealers are high-solid adhesive
sealer products, which cure to a tough, permanently flexible material within 24 hours
when exposed to atmospheric moisture. (The speed of cure depends on bead thickness
and environmental conditions). Temperature resistant from -40°C to +90°C (temporarily
up to 120°C). Ideal for sealing medium and wide car body seams, welding seams or even
suitable for use on wood or plastics. Can be applied directly to bare steel, can be used as
a weld-through sealer. This application must be done whilst the product is still wet
(within 35 mins of application). The product must be left to cure (min 45 mins!) prior to
application of water-based base coats.

A multi-purpose, fast-drying seam sealer that is easily applied
with a brush. The product will not flow or run after application.
Use for sealing floor pans, fire walls, trunk seams, shock absorber
mounting towers, around wheel-wells, fuel filler splash pans and
around headlight and taillight openings.
• Designed to seal sheet metal overlap joints that have been spot-
welded, riveted, or bolted together.
• Can be painted when dry. Remains flexible and resists oil, fuel and
other automotive fluids
• Dries Quickly
• Use brush to restore factory appearance.
• Does not sag or flow.