Page 109 - RotF - Electrical Specification_Neat

GENERAL ELECTRICAL SPECIFICATION
Version 2014-2

C.1 GENERAL

The Electrical Contractor shall supply and install labels and engraved accessories as
scheduled in this Appendix
C.2 LABELS

All labels shall be manufactured from Traffolite engraved with wording as detailed below.
All labels shall be fixed using 6BA round headed, plated brass screws into tapped holes in
the equipment. Self tapping screws or adhesive labels will not be accepted. Lettering shall
be minimum of 5mm high unless otherwise indicated.

C.3 L.V. DISTRIBUTION EQUIPMENT

The main L.V. distribution equipment will be provided complete with all necessary labels
and circuit charts by the Electrical Contractor.

Label For Size Description
1.2 EARTHING CONDUCTORS (Black filled letters on white)

1.2.1 Main Earth Bar 75 x 20 MAIN EARTH BAR

1.2.2 Main Earth Conductor 75 x 20 MAIN EARTH CONDUCTOR

1.2.3 Main Bonding Conductor 75 x 20 WATER
Water

1.2.4 Main Bonding Conductor 75 x 20 STEELWORK
Steelwork

1.2.5 Main Bonding Conductor 75 x 20 COUNTER
Counter

1.2.6 Clean Earth Conductor 75 x 20 TILLS
Tills

1.2.7 Main Bonding Conductor 120 x 20 HVAC DUCTWORK
HVAC
1.2.8 Main Bonding Conductor 120 x 20 KITCHEN EQUIPMENT
Kitchen Equipment

McDonalds Restaurants Ltd

87