Page 16 - RotF - Electrical Specification_Neat

ELECTRICAL SCHEDULES
Version 2014-2

Item No. Description Labour Material Cost

2
Supply and install inclusive of 2.5m 3-core heat resistant
flex, connect, test and commission hand dryers as
5.32 marketed by Airdri Ltd, their model ref Classic Mk II, bright
chrome finish.
Install insectocutor including fixing to background, as
5.33 supplied Free Issue by LAUK.
Supply, fit, set to work; test and commission a disabled
5.34 person toilet alarm system; as C-Tec model NC951

Supply, fit, test and commission a hearing loop system
5.35 inclusive induction loop, microphone and signage.

Supply fit, test and commission a 42” flat screen Freeview
5.36 TV and bracket, including wall fixings and remote control.

Supply and install Cat5e cable between CO2 alarm panel
5.37 and remote sensors and repeat alarm panels, complete
with cable basket and conduit drops to sensors.
Retain existing conventional fire alarm panel, set to work
new devices and test for faults ready for commissioning by
5.38 third party engineer, provide commissioning engineer with
record drawing showing locations of installed devices
including device numbers
2
5.38.1 2.5mm , 3-core fire rated cable installed on tray or
tied to ceiling supports
2
5.38.2 Termination for 2.5mm , 3-core fire rated cables
5.38.3 End of line resistor
5.39 Fire alarm devices complete with fixed base and printed
device label:
5.39.1 Optical smoke
5.39.2 Fixed temperature
5.39.3 Extra over for remote indication associated with
void detectors
5.39.4 6” bell
5.39.5 Surface mounted call point
5.39.6 Interface unit
5.39.7 IP 65 Xenon beacon
5.39.8 Weather proof sounder/bell
New analogue addressable single loop fire alarm panel, set
to work new devices and test for faults ready for
5.40 commissioning by third party engineer, provide
commissioning engineer with record drawing showing
locations of installed devices including device numbers
2
5.40.1 2.5mm , 3-core fire rated cable installed on tray or

McDonalds Restaurants Ltd

14 of 9