Page 390 - McD_6118-AEW-XX-XX-NBS-A-001_Neat

240 SEQUENCE OF WORK
• Hangers, supports, clips, sleeves and other attachments: Securely fixed before
application of coating.
• Sprayed coating and sealer coats:
- Applied and cured before:
Installation of ductwork, piping, conduit and other suspended equipment.
- Application of finishes to adjacent surfaces.

260 PROTECTION FROM OVERSPRAY
• Adjacent areas not to be coated: Protect using suitable shielding/ masking
materials that will not damage the surface when removed.

270 HEALTH AND SAFETY
• Dust, vapour and fumes: Prevent exposure in excess of occupational limits set in
the current Health and Safety Executive (HSE) document EH40.

APPLICATION OF COATINGS

350 SPRAYED COATINGS GENERALLY
• Standards:
- Coatings for fire protection: In accordance with BS 8202-1.
- Coatings for thermal insulation and sound absorption: In accordance with BS
8216.

390 MOVEMENT JOINTS
• Location: Coincident with movement joints in substrate.
- Extend: Through coating to substrate.
• Joint type: Two stop beads with FR sealant infill.

430 COMPLETION
• Remove:
- Masking tape and temporary coverings.
- Overspray from adjacent exposed surfaces.

RotF generic (intermediate) NBS 2014 6118-AEW-XX-XX-NBS-A-01