Page 4 - รายการโครงการ ฮั่น6-3
P. 4
3
Abstract
The objective of this project is aims to the objectives In order to reduce the fat layer on the
water surface Will make more dissolved oxygen And the fat does not clog the pipe Polishing
the engine. There is a method for making artificial experiments by finding other information
as a model for making a project. Using the data collection from surveying, measuring and
measuring the fat mixed with water.
The correction process will reduce the fat out with the water. Or make the fat not go with
the water at all
The results of the study and project project found that 50% of total fat can be trapped from
the test using 250ml water. And 125ml fat It turns out that the trap is approximately 60ml,
due to the fact that the tube is too high to suck the water out.
The efficiency of the grease trap is too low to be used. And too small So it's just a prototype
It can be applied to the point of releasing water into the water source.
