Page 7 - Martin Murungi World View
P. 7

THE
      CUBOID
      The Cuboid is an exersice where we propose a project built up on a
      Plywood based Module. The Module is an arrangement of single and
      muiltiple 19 inch cubed that attempt to accomodate, support and fulˆll
      Structural, Rooˆng, Exterior and Interior Partitioning, Storage, MEP, HVAC
      and Finishing demands of a living space.
               ´                     ´
                  ´                    ´


            ´      ´
                                           522)  '(7$,/              6.< /,*+7  '(7$,/         '225  '(7$,/
                                           3 inch - 6 inch Spray on (white Heat re–ective) Bio-Foam rooˆng       Walk-on internal horizontal light designed to provide maximum   Exterior Door hosted by Exterior wall Module System
                                           system over (tapered) 19 inch Plywood dual System. Predema  daylight with minimal internal structure.  Single entry - Half Flat Glass - Wood Clad.
                                           ˆnish with a 1 inch water gap.  2.5 inch ˆve chamber window with Ovolo and Bevel proˆle.  Solid core wood storm class B
                                                                     Flat roof automatic smoke ventilation roo–ight.  3’ - 0” by 8’ - 7 1/2 “
                                                                     Generic single window assembly with a top hung opening light
                                                                     and ˆxed transom.
                                                                     High performance PVC-U roo–ight with a splayed kerb and a
                                                                     double glazed, –at glass top.
                           19 inch Dual Plywood Rooˆng and
                           Structural Concrete Module for
                           Reinforced Concrete Pour on   Prodema Surface Treatment
                           Reinforced Concrete Columns
                                           Rotary Cut Natural Wood
                                           Bakelite Core
                                           Rotary Cut Natural Wood
                                           Reverse Side
                           Ten 19 inch Dual Plywood Column
                           Module for Reinforced Concrete Pour
                           through 6 inch Foundation Slab
                           and 24” x 12” x 12” Retaining Footing.
                           6” Slab on 2” Insulation, 3” Sand and
                           Gravel.
                           10” reinforced concrete wall bearing   Extended Aluminum Panel Clips.  )/225 &$%,1(7 :$//  '225 72 (;7(5,25   &8%( $1' )281'$7,21  :,1'2:  '(7$,/  1,*+7 $70263+(5(       .,7&+(1 25*$1,=$7,21
                           on a continuous 12x24” strip footing,   We propose Prodema Panel Sub-framing system that can be   Base Cabinet, 2 doors, 1 drawer, 2 deep roll out trays, 1 adjustable shelf  38 inch Entrance mat on
                           apply –uid-applied waterprooˆng to   attached to the Exterior wall Cube Module, Rooˆng Perimeter,  connected to a19 inch Single Plywood Wall Module and Dual Plywood  3 inch by 19 inch precast light weight concrete walk-way tiling  1inch in single panes with 3/8 in cavity on
                           exterior face of wall and footing,   Kitchen and Bathroom areas.  Flooring Module  T -bar threshold strip on  3’ - 2” by 1’  - 7 1/2” wood framing on
                           protected by 2” rigid insulation. Install   Custom –ush overlay natural ˆnished veneer cabinetry, routed  19 inch 1/4 0r 1/2 inch Plywood or Prodema –oor ˆnish tiling  Prodema panel and Silicon waterproof sealant
       6758&785( $;21      perimeter 6” drain-tile at base of footing   ˆnger pulls at doors/drawers, with stainless steel clad plywood  19 inch Dual Plywood Module on 6 inch Foundation Slab
                           placed in gravel wrapped by ˆlter        countertops, with integral sink.  Joint by 3/8” Bolting System
                           fabric, place compacted backˆll to 8”                              Threshold strips for entrances  where the expansion and contraction
                           of ˆnished grade.                                                  of a surface can cause a gap between the interior –oor and adjacent
                                                                                               exterior –oor
   2   3   4   5   6   7   8   9   10   11   12