Page 245 - vol21_editedversion3A
P. 245
Siti Rahaida Abdullah, Firdaus Ali / JOJAPS – JOURNAL ONLINE JARINGAN PENGAJIAN SENI BINA 072612488
2.2.2 Boundary condition
Boundary conditions for the model built in GAMBIT were as below:
Table 1 Boundary conditions
Dimensional Edge/Face/Volume Boundary Condition
2 Inlet (Face) Velocity 0.1 (m/s)
Dimensional Inlet Temp =
368 K
Wall Thickness 0.0005m
Temp =
293K
Outlet (Face) Pressure Temp =
Outlet 293K
2.2.3 Solution of the model
Initializing the solution of the model was the final step towards solving the two-phase flow problem. The following sections
describe the various parameters that had to be specified to initialize a solution and how each parameter was chosen.
Figure 7 Velocity vectors for 30 tubes circular radiator.
Figure 8 Velocity of water flow at the header.
236 | O M I I C O T – V O L 2 1
