Page 10 - Summer 2017 Holiday Instructions Book

Assembly Instructions
in cahoots with Riley and Company
Pop-up Base:
Die cut the base and work all of
the folds as mountain folds. Bring
one end around, creating a box,
and slide the notch at the end of
the strip into the notch at the
center of the strip. Repeat for the sure the center of the base is
other end. Add glue between the
two center pieces to seal.
view video tutorials at : karenburniston.c om
Assembly:
For a standing
pop-up, (viewed
with the card opened
fully flat) glue the base directly
over the fold of a card, making
directly over the fold of the card. with the sleigh. Glue a
Also pay attention to the orienta-
tion of the base so the pattern in
the base matches the pattern on
the sleigh. Glue a sleigh to each
side of the base, lining up the
patterns. Fill the sleigh by gluing the center of the base.
items to the center of the base.
1021 Sleigh Pop-up
Alternate Assembly:
To create a traditional pop-up
(viewed with the card opened to
90 degrees), first glue a sleigh to
the back wall, then glue the base
into the fold of the card as shown,
lining up the pattern
second sleigh to the
front of the
base. Fill the
sleigh by
gluing items to
Sizes:
Sleigh: 3.8” x 2.8” (9.7 cm x 7.1 cm)
Minimum card size recommended:
A2 (4.25” x 5.5” when closed)