Page 60 - Orthopedic Casts and Splints2

Performance Steps

4a
Inspect patient's injured arm w/ BSI techniques

CAUTION: Always practice Body Substance Isolation (BSI) prior to applying traction, splints or casts to
patients.(figure 3-x)
b. Inspect both arms for any skin conditions(e.g. cuts, abrasions, laceration and skin rashes).
NOTE: Inform physician if conditions are present and follow physician's instruction.
c. Examine both arms and wrists for jewelry and remove if found.
NOTE: All jewelry on both hands and wrist must be removed. Give jewelry to family member or secure
with patient's belongings in NCOIC office.
5. Check capillary refill of patient's hands/fingers.
a. Squeeze patient's fingers and nail beds will turn white .
b. Release patient's fingers and nail beds will return pink .
CAUTION: If capillary refill is delayed for more than 2 seconds inform physician and follow physician's
instruction.
6. Gather equipment to include scissors, goniometer, thermometer and bucket of tepid water w/
bag. Place on work cart or station.
CAUTION: The temperature of the water must be tepid ( 70-80 degrees) to reduce further injury
(possible burns) to the patient. The technician should draw room temperature water and initially use a
thermometer to gauge water temperature.

CAUTION: The technician must change the water after each application as the residue in the cast
bucket will act as an accelerator causing the casting material to increase in heat emission.

57