Page 77 - Orthopedic Casts and Splints2

Performance Steps

22
Use of goniometer after casting application

a. Place the stationary arm of the goniometer vertically , bisecting the ulnar.
b. Place the moving arm of the goniometer vertically, bisecting the lateral side of the 5th
phalange (little finger)
c. Place the protractor of the goniometer on the ulnar styloid.
d. The wrist is measured between 0-15 degrees of dorsal extension.
NOTE: If wrist is not within 0-15 degrees of dorsal extension, ulnar or radial deviation are present,
remove cast and go to step 11.
23. Check cast dimensions(Refer to figure 3-x)

74