Page 8 - Legend Owners Manual

Dirt: Dirt creates a starting point for mildew when moisture is present. Cleaning periodically with
a mild natural soap (BABE’S Clever Cleaner) and water while unit is mounted on the boat will extend
canvas life and provide better appearance. Cleaning can be accomplished with a sponge or soft scrub
brush. Canvas should always be fully mounted and adjusted to a tight, smooth appearance before washing.
Allow canvas unit to air dry thoroughly before removing or loosening any canvas.

Heat: Under certain conditions, heat may cause plasticizer migration. Any vinyl coated fabric
when enclosed in a polyethylene container and under direct sunlight is subject to potential
migration of the vinyl plasticizers. This will result in cracks appearing on the vinyl components,
and have a stiffening effect on the fabric. Polyethylene bags or tubes are meant only for
protection during shipping and handling. Do not use them for storage.

Ultraviolet Degradation: Most synthetic fabrics are U.V.R. treated to resist ultraviolet effects.
The best protection, however, is to avoid long periods of storage in areas subjected to direct sunlight.

Salt Water: Corrosive effects of salt water can erode brass, aluminum, or stainless fittings and
fasteners. Your canvas has fittings and fasteners made of these materials. These can be protected
by keeping them clean, occasionally lubricating them and waxing the chromed brass or stainless
fittings and tubing periodically with an appropriate wax.

In short here a few tips to help you protect your investment and give you years of enjoyment:

1. Keep it clean. DO NOT use harsh cleaners. Never use any form of bleach.
2. Clear vinyl curtains and windows demand extra care to prevent scratching. Ideally, they
should be washed with clean water, preferably hosed off, wiping it with your hand at the
same time. Do not use a cloth or chamois skin. Any dirt or grit in the cloth may result in
scratches. Clear water and a clean hand is the safest way. When storing, never fold these
items, they should be rolled to prevent cracking.
3. Under direct sunlight conditions, do not allow the clear vinyl to come into contact with the
framework. The framework gives off heat that will burn the clear vinyl.
4. Be sure that top is completely dry before storing.
5. Keep unit well ventilated when stored, do not store in plastic or poly bags.
6. Keep fittings and fasteners clean and lubricated.
7. Never trailer your boat with the canvas unit mounted or expose the unit to severe winds.

8