Page 10 - Statement of Qualifications
P. 10

RLC SERVICES





                              RC Compliance Analysis (PRC-024 thru 27)
                               P
                                D
                               ER (Distributed Energy Resources)
                                S
                               tudies (DG, Facilities, Short Circuit, Arc Fault, Grounding)
                                tandards Development (61850, 67N)
                                 S
                                 Specification Development (Panels, Major Equipment)
                                  T
                                 esting and Commissioning
                                  OE Support (Design, Project Management)
    RLC Engineering                stimating
                                    E
      developed and

   presented a NERC                Automation & Integration
                                    RLC provides traditional 61850 and automation & integration engineering
    certified training              solutions for utility applications including transmission, distribution, and

       course on the                 wind farm generation. We offer a complete package of design, protection

    Fundamentals of                  & control, and automation & integration services, ranging from simple
                                      RTU replacements or additions to comprehensive substation HMIs and
   System  Protection                  fully integrated substations. We have experience with a variety of vendor

   for CMP and PSNH                    platforms and operating practices, along with the tools and skills needed
                                        to develop, test, and commission your application. RLC also provides an
   System Operators.                    impartial evaluation of vendors and equipment in order to meet each

                                         customer’s unique specifications and needs.
                                          RLC engineers have relay application and setting experience with most
                                          of the microprocessor relays and alarm and control devices commonly
                                           used in today’s utility applications. RLC also developed and presented
                                           a NERC certified training course on the Fundamentals of System
                                            Protection for CMP and PSNH System Operators.

                                             Software Applications: RLC Engineering personnel are competent
                                             and knowledgeable users of AcSELerator, ASPEN, AutoCAD,
                                              CYME, Enervista, PLS-CADD, PSSE, RISA, RISA 3d, Sage, SKM
                                               PowerTools, and WinIGS.

                                                Experience
                                                Passadumkeag Wind Project
                                                 RLC developed all interconnection application documents
                                                  including the ISO-NE studies for this 13 - turbine 39.975 MW
                                                  wind project.  RLC created the design documents necessary
                                                   to construct a 34.5 kV collection system consisting of 9 miles
                                                   of underground and 8 miles of overhead along with the
                                                    transmission line interconnection to the utilities transmission
                                                     system. RLC developed the design documents required to
                                                     construct a 115 kV Delta to 34.5/19.2 KV grounded wye
                                                      substation and a 115 kV, 3000A three-breaker ring bus
                                                      switching station. Services included construction support,
                                                       testing and commissioning support, and final installation.



       10            STATEMENT OF QUALIFICATIONS                                                                                                                                               STATEMENT OF QUALIFICATIONS                         11
   5   6   7   8   9   10   11   12   13   14   15