Page 16 - CRESTRON HOME OS-3

l Hide a mirrored display: Hide a display from the Crestron Home User Interface when it is
mirrored with other displays in the room by selecting Hide this display in the Advanced tab
in the display settings page. For details, refer to Display Settings (on page 683).
l Use digital inputs as a button: Connect a contact closure keypad to a digital input in the
system and use it like a native Crestron keypad. To configure, go to Pair Devices > Other,
add a Button, and then program the button like a keypad. For details, refer to Add Other
Devices (on page 77) and Configure Contact Closure Keypads (on page 237).
l Crestron Driver update: Drivers downloaded from drivers.crestron.io that are tested by
Crestron display the Crestron swirl logo. Included legacy security system drivers also
display the Crestron swirl logo. For details, refer to Add Driver Devices (on page 68) and
Load Crestron Drivers (on page 868).
l Added security for CEN-IO and DM NVX® devices: The Common Device credentials are
now used when adding CEN-IO and DM NVX® devices to the system. For a list of devices
that use the Common Device credentials and minimum firmware versions, refer to Secure
Device Connections (on page 46).
l Randomized delays in sequences: Add a delay to a sequence that ends at a random time.
Set the minimum and maximum length of the delay and the system will make sure that
the delay ends at a random time within that range. For details, refer to Create Quick
Actions (on page 135).

NOTE: If upgrading from Crestron Home version 3.003.00037 to 3.004.0071, the Add
Random Delay button may not display when creating a sequence quick action. Please
restart the Crestron Home Setup app to display the button.

l Vacation scheduler: Mimic a lived-in environment when the homeowner is away by
creating a vacation schedule. Additionally, use the vacation scheduler features to create a
lived-in environment during everyday events. For details, refer to Vacation Scheduler (on
page 255).
l Media zone sleep event: Use the Media Zone Sleep event to trigger an event. For details,
refer to Configure Media Zone Events (on page 157).
l Added support for CHV-TSTAT-FCU: The CHV-TSTAT-FCU is now supported in Crestron
Home® systems. For details, refer to Climate Control (on page 612) and Thermostat
Settings (on page 778).
l Custom dimming curves: Use a custom dimming curve with CLX-1DIMU4, CLX-1DIMU4-
HP, CLX-2DIMU8, CLX-2DIMU8-277, CLXI-2DIMU8, CLW-DIMUEX-P, CLW-DIMFLVEX-P,
HZ-DIMEX, HZ-DIMFLVEX, HZ-DIMUEX, DIN-2LEDPWM8 dimmers. For details, refer to
Lighting Load Controller Settings (on page 721).
l Trigger events using an Extension Device event: Trigger a Sequence Quick Action when an
Extension Device event occurs. For details, refer to Configure Extension Devices (on
page 238).

16 • Crestron Home™ OS Product Manual — Doc. 8525Z