Page 39 - Dante Controller User Guide
P. 39
Dante Controller User Guide
Using Dante Controller
Dante Controller presents two main types of view: Network View and Device View.
Important: After making changes to Dante network routing (e.g. subscriptions, device names,
channel labels etc.) please wait at least 5 seconds before disconnecting or powering down any
affected devices. This ensures that the new information has been properly saved to the devices.
Device configuration (e.g. sample rates, latency, clock settings) are saved instantly.
Note: macOS users: Please note that the key combinations shown below are for Windows users.
When using Dante Controller on a Mac, use the “Command (CMD)” or “Apple” key instead of the
“Control” key when following the instructions below, and substitute standard Mac key combinations
where applicable – see the Dante Controller menu for details.
Network View
When Dante Controller is started, it opens at the Network View, with the Routing tab selected.
Copyright © 2020 Audinate Pty Ltd. All rights reserved. -39-
