Page 50 - Dante Controller User Guide
P. 50
Dante Controller User Guide
Note: If no device information is displayed for a device, it can indicate a ConMon (Dante control and
monitoring service) failure on the device. The device may need to be reset or restored.
Clock Status
The Clock Status tab provides a network-wide overview of the clocking state within the network.
This view provides a convenient way of quickly scanning the network for clock information. For DDM
networks, devices are grouped into their respective IP subnets.
The tabular view presents the following information, in columns from the left:
Device Name
The device name currently associated with the device.
Sync
Indicates the clock sync status for the device.
n A green light indicates that the device is currently synced to (or is driving) the network clock
n A red light indicates that the device is not currently synced
Mute
Indicates the mute status for the device.
n A red mute icon indicates that the device is currently muted (usually due to loss of clock sync)
n No icon in the mute column means that the device is not muted (audio should be flowing normally)
Clock Source
Indicates the clock source for the device.
n Dante: The device is deriving its clock from the Dante network, or is acting as master clock (but not
deriving its clock from an external source)
n External: The device is deriving its clock from an external word clock source
Copyright © 2020 Audinate Pty Ltd. All rights reserved. -50-
