Page 61 - Regal ideas Binder_USA_2020

Frameless Glass Railing
®
Installation Instructions
FRAMELESS GLASS RAILING SYSTEM
INSTALLATION INSTRUCTIONS (ON FLAT SURFACES)

1.25in - 2.5in
CRBE-SA
1.25in - 3.75in CRBA-SA

3-6in 1.25in - 3.75in
3-6in CRSP-SA

3-6in

Diagram D CRH-SA CRBC-SA

Component Profiles:

CRH CRLC CRDT CRG24-60
Horizontal Glass Mount with LED LED Controller & Remote Double-T Splitter Connection Cord CrystalRail Low-Iron Tempered
• To hold CrystalRail Low-Iron • For use with Crystal Rail glass • 78” (2 meter) cord Glass
tempered glass panels (CRG) mounts • Connects power to LED’s • 10mm thickness
• c/w white LED light inside mount • Max 40 glass mounts per con- • One required for each glass
troller section (per 2 mounts)

OFF
ON

CVC CRBW CRBA CRSP
Vacuum Cup Adjustable Wall Bracing Clip Adjustable Angle and Line Clip End Bracing Support
• Vacuum tool for easier moving • To secure 10mm CrystalRail • Secures two CrystalRail Tem- • Provides support to
and handling of 3/8” (10mm) glass Tempered Glass panel to Wall. pered Glass panels together. CrystalRail Tempered
panels (2 required) • Made from 100% aluminum. Used in-line or on corners. Glass panel that is open
• Made from 100% aluminum. on one side.
(i.e. stair opening).

CRBC CRBE CRGH CRIL
Base Plate Cover for Support Post End Bracing Clip Gate Hinge Set Magnetic In-line Gate Latch
• Wraps post base to hide fasten- • Bracing clip to connect Crystal • Durable hinge set used to hold • Adjustable magnetic in-line
ers and provide a more finished Rail glass panels to end support the Crystal Rail Glass panel for latching system
appearance. post at end section of horizontal the gate. • For use in horizontal in-line gates
glass.

CRCL CRGG CREG MP5
Magnetic Corner Gate Latch Glue Dispenser Acrylic Adhesive 5” Aluminum Bolt-Through Mount-
• Adjustable magnetic corner gate • Applicator for 2 part epoxy. • Used to fasten Crystal Rail ing Plate
latching system • Used to fasten Crystal Rail brac- bracing clips to glass. Includes • For undermount application.
• For use in 90° corner gates ing clips to glass. glue tube with mixer tips and 4
needle tips.

5

regalideas.com Section 2 | Installation (Deck or Flat Surface)
V1.2