Page 12 - ZVPlasty - Hensler Technique Guide 2021

ST-007 rev-4

Step 4: Creation of Void
Step 4
Insert the curved cannula through the access cannula at
a desired depth using markings on curved cannula and
using imaging as a visual aid. Once desired depth is
met, rotate the curved cannula back and forth
(clockwise and counter-clockwise) several times to
ensure a void is created.

Step 5: Curved Stylet Removal
Step 5
After void is created. Remove curved stylet handle by
rotating counter-clockwise and simultaneously pulling
the curved stylet handle outward.

Page 11 of 19